JVC DT-V20L3DY To adjust the stand height, To prevent an accidental fall, Fixing the monitor

Page 5

To adjust the stand height

To change the stand height, detach the stand from the monitor (☞ “To detach the stand” on page 4). Then, change the position of the stand plate according to the stand height you want by choosing the screw holes to use.

<Higher position>	<Lower position>
Screw holes for higher position	Screw holes for lower position

Stand plate

Stand body

To prevent an accidental fall

Fix the monitor to a wall by using strings.

Fixing the monitor

Attach the hook (not provided) to the VESA mounting holes on the rear panel (use the two holes on the upper side) using M4 x 10 mm screws (not provided). Bind the hooks on the rear panel of the monitor to a wall or a pillar using durable string.

VESA mounting holes

Hook and screw (M4 x 10 mm)

(not provided)

Hook (not provided)

The illustration of the monitor is of DT-V24L3DY.

Image 5

Contents DT-V24L3DY These openings must not be blocked or covered Safety PrecautionsImportant Safety Instructions To detach the stand InstallationTo install the stand Fix the monitor to a wall by using strings To adjust the stand heightTo prevent an accidental fall Higher position Lower positionFront panel Display the menu Press or button when a menu is not displayedPress buttons to select an item, then press button Press Menu buttonRear panel Attaching the power cord holderVideo signals Available signalsComputer signals preset DVI-D Hdcp terminals Specification of the DVI-D Hdcp terminalSetting value -20 +20 Menu Configuration-MAIN MenuPicture Function Operation guideMARKER*1*2 Setting of Area MARKER, Safety MARKER, R-AREA MarkerSettings for marker functions 1/2 Settings of E.AUDIO Group Sync Function Wave Form SETTING*1Example of the wave form monitor Settings of SD43 Large Settings of sub menu PosiSettings for the information display of the monitor Setting of Character SETControl Lock Setting value OFF, on InformationAbout the external control External ControlControl priority is as follows MAKE/TRIGGER systemTo assign the functions to the pin terminals Using the MAKE/TRIGGER systemOperation of the external control Functions controlled by the MAKE/TRIGGER systemCommunication specifications Using the serial communicationCommand outline Basic command listTroubleshooting Self-check program Maintenance20Input/output terminals SpecificationsGeneral Side view Dimensions Unit mm inchFront view Page DT-V24L3DY/DT-V20L3DY Multi Format LCD Monitor

To adjust the stand height

<Higher position>

<Lower position>

To prevent an accidental fall

Fix the monitor to a wall by using strings.

Fixing the monitor