Daily Operations / Connections | 6 |
7Front panel
Tally lamp
This lamp is controlled by the tally function of the MAKE/TRIGGER terminal (☞ “ TALLY SELECT” in “FUNCTION SETTING” on page 14 and “External Control” on page 16).
•“NO EFFECT” is displayed when you press a button which is not available for the current input or signal format (the lamp lights even when the function does not actually work).
•The items controlled by the MAKE system cannot be controlled by the buttons on the front panel (“REMOTE ON” is displayed and the lamps do not light).
The illustration of the monitor is of
1Speakers (stereo)
The speakers emit the same audio signal emitted from the AUDIO ASSIGN (MONITOR OUT) terminals.
(☞ “ 8 AUDIO ASSIGN (MONITOR OUT) terminals” on page 8)
2VOLUME adjustment knob Adjusts the volume.
3Picture adjustment knob PHASE: Adjusts the picture hue. CHROMA: Adjusts the picture color density. BRIGHT: Adjusts the picture brightness. CONTRAST: Adjusts the picture contrast.
4MUTING button
Turns off the sound when no menu screen is displayed.
•To cancel the function, press the button again or turn the VOLUME adjustment knob.
•Muting function is also canceled when “BALANCE” of “AUDIO SETTING” in the MAIN MENU is changed (☞ page 12).
5/ / 
/ 
buttons
When a menu screen is displayed
Selects or adjusts menu items. (☞ “Menu
Operations” on page 7)
When no menu screen is displayed
Selects the audio channels of EMBEDDED AUDIO signals. (☞ “Audio Channel Selection” on page 7)
•Pressing 
button while holding 
button displays the
6MENU button
Activates/deactivates the display of the MAIN MENU.
(☞ “Menu Operations” on page 7)
7COLOR OFF button/lamp Displays only the luminance signal.
• This function does not work for RGB input signals.
81:1 button/lamp
Displays the picture in the original resolution of the input signal.
•The aspect ratio of the picture may change depending on the input signal.
9AREA MARKER button/lamp Displays/hides the area marker.
•Select the style of the area marker in “MARKER” of the MAIN MENU (☞ page 11).
•This function works only when displaying the picture in 16:9 aspect ratio.
•This function does not work when “AREA MARKER” or
pSAFETY MARKER button/lamp Displays/hides the safety marker.
•Adjust the area of the safety marker in “MARKER” of the MAIN MENU (☞ page 11).
•This function does not work when displaying the picture in the 1:1 mode.
•This function does not work when “SAFETY MARKER” or
qSCREENS CHECK button/lamp
Displays only the selected element (R, G, or B) of the video signal.
•Each time you press this button, the screen changes in the following order.
RGB (Normal screen) | Red screen |
Blue screen | Green screen |
wASPECT button/lamp
Changes the aspect ratio of the picture from 4:3 to 16:9 when the picture of 16:9 aspect ratio is squeezed into 4:3 format signal.
•To return to 4:3, press the button again.
•This function does not work when displaying the picture in the 1:1 mode.
eWAVE FORM button/lamp
Displays/hides the indication of the wave form monitor.
•Adjust the settings of the wave form monitor in “WAVE FORM SETTING” of the MAIN MENU (☞ page 13).
•The closed caption (☞ page 13) disappears when the wave form monitor is displayed.
rT.C. (time code) button/lamp Activates/deactivates the display of the time data (time code) contained in the SDI signal.
(☞ “On the Information Display” on page 7)
tINPUT SELECT buttons/lamps Selects an input.
SDI 1: E. AUDIO HD/SD SDI (IN 1) terminal
SDI 2: E. AUDIO HD/SD SDI (IN 2) terminal
DVI:
COMPO./RGB: COMPO./RGB terminal
VIDEO 1: VIDEO (INPUT 1) terminal
VIDEO 2: VIDEO (INPUT 2) terminal
• The lamp for the selected input lights.
yPower lamp
Unlit: The monitor is completely off (the Power switch on the rear panel is turned off).
Lights in Green: The monitor is on.
Lights in orange: The monitor is off (on standby).
Flashes in orange: The monitor is in the P. SAVE (power save) mode (☞ “NO SYNC ACTION” in “SYNC FUNCTION” on page 13).
u 
button
Turns on and off (on standby) the monitor.
•The power switch is equipped on the rear panel of the monitor (☞ 1 on page 8).