JVC GD-V501PCE manual Setup for input signals Sync, Freq. kHz/V-Freq. Hz, Setting RGB sync signal

Page 32

Setup for input signals

Sync

Select Signal from the “Setup” menu during RGB or PC input signal mode.

Press to adjust.

R

Press to exit from adjust mode.

Setup

 

Component/RGB-in select

RGB

 

Signal

 

Screensaver

English (UK)

OSD Language

Set up TIMER

 

Press (ACTION) button

Signal

 

[

RGB

]

Sync

 

H & V

 

 

H-Freq.

31.5

kHz

 

 

V-Freq.

60.0

Hz

 

 

Signal

 

[

PC

]

Sync

 

H & V

 

 

H-Freq.

31.5

kHz

 

 

V-Freq.

60.0

Hz

 

 

Setting RGB sync signal:

Confirm that the input is set to RGB input (this setting is valid only for RGB input).

H & V: The H and V sync signals are input from the HD/VD connector.

on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.

on VIDEO: Compatible with the scart plug (Europe)

The composite video signal input from the VIDEO input terminal is used by dividing the sync signals.

Setting PC sync signal:

Confirm that the input is set to PC input (this setting is valid only for PC input). H & V: The H and V sync signals are input from the HD/VD connector.

on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.

Sync

H & V

Sync

on G

Sync

on VIDEO

Sync

H & V

Sync

on G

H-Freq. (kHz)/V-Freq. (Hz)

Displays the H (Horizontal)/V (Vertical) frequencies.

This display is valid only for RGB input and PC input.

Display range:

 

Horizontal

15.5 - 110 kHz

Vertical

48 - 120 Hz

H-Freq. V-Freq.

31.5

60.0

kHz Hz

32

Image 32
Contents Plasma Display Monitor GD-V501PCEINSTRUCTIONS Table of Contents Important Safety Notice Trademark CreditsImportant Safety Notice For UK only Important the Moulded PlugWhen using the Plasma Display Safety PrecautionsSetup If problems occur during use Cleaning and maintenanceSafety Precautions Accessories Accessories SupplyOptional Accessories Check that you have the accessories and items shownRemote Control Batteries Precaution on battery useObserve the following precaution Helpful HintConnections Cable fixing bandsInstalling the ferrite core Small size Installing the ferrite core Large sizeSignal Names for D-sub 15P Connector PC Input Terminals connectionInstalling the ferrite core CommandSerial Terminals connection Communication parametersBasic Controls Input button AVS Video, Component/RGB and PC Mode Selection Sound mute On/Off see Volume AdjustmentOFF Timer button Basic ControlsPower On/Off and input signal selection Power On/OffConnecting the plug to the Wall Outlet AC cord connectionSelecting the On-Screen Menu Language Select the input signalPower On/Off and input signal selection On-Screen Menu Display from Remote Control To Picture adjust menu Press to select each item SeeOn-Screen Menu Display from Remote Control See page 30 Component see To Signal screen for PC seeAspect Controls Aspect Controls ZoomJust AutoAdjusting Picture Pos./Size Adjusting screenAdjusting Picture Pos./Size Size Clock Phase RGB/PC in ModeHelpful Hint N / Normalise Normalisation PosSound Adjustment MuteBass TrebleSurround Surround Button Surround ControlsOn Off Picture Adjustments NormalDynamic CinemaAdvanced Settings Picture AdjustmentsSet up Timer Present Time SetTimer Set Setup TimerMode selection Screensaver For preventing after-imagesReversal / Scroll selection To stop the Screensaver under On, press the buttonScreensaver For preventing after-images Setup of Screensaver TimeSide Panel Adjustment 3D Y/C Filter For Ntsc AV images Setup for Input SignalsComponent/RGB-in Select Setup for Input Signals Colour system / Aspect AutoPulldown If the picture image becomes unstableSetup for input signals Sync Setting RGB sync signalSetting PC sync signal Freq. kHz/V-Freq. HzTroubleshooting Plasma Display panel Symptoms CheckAV input signals Component /RGB/PC input signalsConnection to the Optional Video Input Card. IF-C50P1G PC RGB inputVideo 4 pin socket Video signal connectionAV Input Terminals connection AV Out Component/RGB Input connection Component signals Y, PB, PR connectionRGB signal R, G, B, HD, VD connection Specifications Specifications DimensionsMass Weight Optional SuppliedGD-V501PCE Plasma Display Monitor