JVC GD-V4210PCE-G, GD-V4211PCE Video Adjustments, Adjusting the Picture Quality, Menu/Exit

Video Adjustments

		MENU INPUT		POWER
2 / 3	5 / 5	MENU
	DISPLAY	ASPECT	POWER
	VIDEO A	VIDEO B COMPO.		RGB
	MUTING		VOLUME
	MULTIPLE	MONITOR	ADJUSTMENT
	MODE	ID SET	ID
				2 / 3
	MENU/EXIT			5 / 5
MENU/EXIT
	RM-C575 REMOTE CONTROL UNIT
16

For video adjustments, use menus.

You can use the buttons either on the remote control or on Monitor for menu operations.

• Refer also to “Menu Classifications” on pages 33 and 35.

Adjusting the Picture Quality

Picture quality can be set for each input mode.

1 Press MENU/EXIT (or MENU on the Monitor) to display the Main Menu.

M A I N M E N U

Cursor (3)	P I C T U R E A D J .
	S I Z E / P O S I T I O N A D J .
	F U N C T I O N S E L E C T
	S T A T U S D I S P L A Y
	E N T E R :	S E L E C T :	E X I T :
				M E N U

2 Press 5/∞ to move the cursor (3) to “PICTURE ADJ.”

3 Press 3 to display the Picture

Adjustment Menu.

V I D E O A

P I C T U R E A D J .
C O N T R A S T	: + 0 1
B R I G H T	:	0 0
C H R O M A	: – 0 2
P H A S E	:	0 0
S H A R P N E S S	: 0 0

s u b m e n u r e s e t

A D J U S T : S E L E C T : E X I T : M E N U

4 Press 5/∞ to move the cursor (3) to the item you want to adjust.

Item	Adjustment	Standard
	range	(Reset)
CONTRAST	–20 to +20	+10
BRIGHT (brightness) –20 to +20		0
CHROMA*	–20 to +20	0
PHASE**	–20 to +20	0
SHARPNESS	–20 to +20	0

sub menu	See “To make an adjustment
	while viewing the adjustment
	bar” on the next page.
reset	See “To reset the adjustments” on
	the next page.

*Adjustment is not possible when RGB input is selected.

**Adjustment is only possible when viewing NTSC signal through the VIDEO A or B terminal.

5 Press 2/3 to make adjustments.

6 Press MENU/EXIT (or MENU on the Monitor) twice to exit from the menu operations.