JVC GD-V4211PCE, GD-V4210PCE-G, GD-V4210PZW-G Setting the Receivable Signal Types

Video Adjustments (Continued)
					Setting the Receivable Signal Types
					You can set the receivable signal types. Normally, select
					“AUTO.”
					A common setting will apply to both VIDEO A and B
					terminals, and a different setting will apply to the
					COMPONENT terminals.
					1 Press MENU/EXIT (or MENU on the
					Monitor) to display the Main Menu.
							M A I N M E N U
					Cursor (3)	P I C T U R E	A D J .
						S I Z E / P O S I T I O N A D J .
						F U N C T I O N S E L E C T
						S T A T U S D I S P L A Y
		MENU INPUT		POWER
						E N T E R :	S E L E C T :	E X I T : M E N U
					2 Press 5/∞ to move the cursor (3) to
					“FUNCTION SELECT.”
2 / 3	5 / 5	MENU			3 Press 3 to display the Function
					Selection Menu.
						F U N C T I O N S E L E C T
						C O L O R T E M P .		: H I G H *		*
						P I C T U R E M O D E		: S T I L L
						A S P E C T		: P A N O R A M A
						S I G N A L M O D E		: A U T O
						R G B I N P U T		: A
						r e s e t
						A D J U S T :	S E L E C T :	E X I T : M E N U
					* “PICTURE MODE” and “SIGNAL MODE” do not
	DISPLAY	ASPECT	POWER		appear at the same time.
					“PICTURE MODE” appears when RGB input is
	VIDEO A	VIDEO B	COMPO. RGB		selected, and one of the following signals comes in —
	MUTING		VOLUME		RGB15K-50, RGB15K-60, PC98, VGA480-60, SVGA-56,
					SVGA-60, and XGA-60. On the other hand, “SIGNAL
					MODE” appears when VIDEO A, VIDEO B, or COMP.
	MULTIPLE	MONITOR ADJUSTMENT			(component) input is selected.
	MODE	ID SET	ID		4 Press 5/∞ to move the cursor (3) to
				2 / 3	“SIGNAL MODE.”
					5 Press 2/3 to select the receivable video
MENU/EXIT	MENU/EXIT			5 / 5
					signal type.
	RM-C575 REMOTE CONTROL UNIT
					Each time you press the button, the receivable video
					signal type changes as follows:
					• When VIDEO A or VIDEO B input is selected:
						AUTO	NTSC			NTSC4.43
						SECAM				PAL
					• When COMPONENT input is selected:
						AUTO	480i		576i
						1080i	720p		480p
						(1035i)*
					* Changes according to the “HD SIGNAL MODE”
					setting (see page 27).
					6 Press MENU/EXIT (or MENU on the
					Monitor) twice to exit the menu
					operations.
22