JVC GD-V4210PZW, GD-V4211PCE, GD-V4210PCE Bright, Size, Color Temp, Aspect, Signal Mode, RGB Input

Menu Classifications (Continued)

PICTURE ADJ. (Picture adjustment): See page 16.

CONTRAST	Adjusts the contrast of the picture.
BRIGHT	Adjusts the brightness of the picture.
CHROMA***	Adjusts the color density of the picture.
PHASE*	Adjusts the color phase.
SHARPNESS	Adjusts the outlines of the picture.
sub menu	Displays the fine adjustment bar.
reset	Resets the Picture Adjustment Menu settings to defaults.

SIZE/POSITION ADJ. : See page 17.

H.SIZE	Adjusts the horizontal screen size.
H. POSITION	Adjusts the horizontal screen position.
V. SIZE	Adjusts the vertical screen size.
V.POSITION	Adjusts the vertical screen position.
CLOCK PHASE**	Adjusts to eliminate stripes or flickering.
	Normally, no adjustment is needed.
sub menu	Displays the fine adjustment bar.
reset	Resets Size/position Adjustment Menu settings to defaults.

FUNCTION SELECT: See pages 19 to 23.

COLOR TEMP.	Adjusts the color temperature.
	Use when the picture is reddish or bluish.
PICTURE MODE**** Selects the picture quality suited to either the still picture or the moving picture.
ASPECT	Selects the horizontal to vertical ratio of the screen.
SIGNAL MODE***	• Selects a color system (NTSC, NTSC 4.43, PAL, SECAM) when VIDEO A or VIDEO B input is
	selected.
	• Selects a scan system — 480i, 576i, 480p, 720p, 1080i (1035i) — when COMPONENT input is
	selected. Normally, set to “AUTO.”
RGB INPUT	Sets the correct RGB terminal you use.
reset	Resets the Function Selection Menu settings to defaults.

*Adjustment is not possible when RGB input is selected.

**Adjustment is only possible when viewing NTSC signal through the VIDEO A or B terminal.

***Adjustment is only possible when RGB input is selected.

****Adjustment is only possible when the RGB15K-50, RGB15K-60, PC98, VGA480-60, SVGA-56, SVGA-60, or XGA-60 signals come in.

34