JVC DLA-M2000LU manual Adjusting the Inclination of the Projector

Page 13

No.51781

Installing the Projector

Adjusting the Inclination of the Projector

The vertical angle and the leveling of the projector can be adjusted with the adjustable feet at the bottom of the projector.

■Adjusting the vertical angle of the projector

While pushing the levers on both sides upward, raise the projector. The adjustable feet automatically extend. To retract the feet, push the levers and lower the projector slowly; the projector is fixed at the position where you release the levers.

lever

Adjustable feet (at the front)

■Leveling the projector

Lift the projector, rotate the rear adjustable foot, and adjust the horizontal angle until the projector is level.

Installing the Projector

Installing the Projector against the Screen

The projector should be placed so that the center line of the lens is at a right angle to the screen as shown in the following figures.

■ Side view

 

 

 

 

■ Top view

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

■Trapezoidal-distortion correctable maximum angle

The projector has a function to correct the trapezoidal distortion of the projected image on the screen.

To correct this distortion, use the KEYSTONE buttons on the projector. (Refer to “Removing the Trapezoidal Distortion of the Image” on page 34.) Also, correction is possible by using the “Keystone” menu. (Refer to “Setting and Adjusting Other Functions (OPTIONS)” on page 52.)

Correctable angle:

Correctable angle:

1-13

Adjustable foot (at the rear)

Fixing foot (at the rear)

Extend Shorten

16

Up to approx. 20° upward from the horizontal line

Up to approx. 20° downward from the horizontal line

17

ESPAÑ OL ITALIANO FRANÇ AIS DEUTSH ENGLISH

DLA-M2000LU DLA-M2000LE

Page 12 Page 14
Image 13
Page 12 Page 14
Contents DLA-M2000LU Power cord Do not allow any unqualified person to install the unitContents DLA-M2000LE For United Kingdom For European Product should be placed more than one foot awayUnited Kingdom only How To Replace The FuseDo not cut off the main plug from this equipment This Apparatus Must be EarthedAA/R6-size dry cell battery Remote control unit RM-M2000GApprox m For checking operationFront Side / Top Surface / Right Side Controls and FeaturesLeft-hand Side / Rear Side Control Panel on the Projector Bottom SurfaceConnector Panel For remote control only Remote Control UnitInstalling Batteries Installing the ProjectorPrecautions for Installation Installing the Projector against the Screen Adjusting the Inclination of the ProjectorTrapezoidal-distortion correctable maximum angle Projection Distance and Screen Size Setting the Amount of Lens ShiftingSetting the Position Selecting Screw for Ceiling Mounting Effective Range and Distance of the Remote Control UnitWhen installing adjusting/setting the unit Using as a wireless remote control unitSignals that Can Be Input to the Projector Connecting to Various DevicesVideo signals Computer signalsConnecting to Hi-Vision Devices Connecting to Video DevicesBNC-RCA Video devicesConnecting to Devices which Control the Projector Connecting to Other DevicesGame device, etc Desktop typeConnection to an IBM PC or IBM-compatible computer Connecting to Computer DevicesConnection to Macintosh Basic Operations Connecting the Power CordRemoving the Lens Cap Adjust Focus Adjusting Sound Volume Language displayAdjust the Screen Size Zooming Projector’s buttons Select the Input source to be ProjectedRemoving the Trapezoidal Distortion of the Image Turning off Image and Sound HideQuick Alignment Function Quick Align Menu Transition Diagram in No signal Menu Mode Remote control unit Displaying a Still Picture FreezeQuick Reference Guide for No signal Menu Mode Menu OperationsQuick Reference Guide for Video Menu Mode Menu Transition Diagram in Video Menu ModeSubmenus in Video Menu Mode AUTO*/NTSC/NTSC4.43/PAL/SECAMQuick Reference Guide for PC Menu Mode Menu Transition Diagram in PC Menu ModeEnter Basic Menu Operation Changing the Language Display Changing the Color System Video Menu Mode OnlySet the color system with the cursor button 5 or ∞ Adjusting Picture Quality Adjusting Tracking / PhaseAdjusting Color temperature Adjusting the Video Screen/Menu PositionVideo submenu Setting 1 submenu PC submenu Setting submenuChanging the Image Size Resize Function PC Menu Mode Only Changing the Image Tone/Aspect Ratio Video Menu Mode OnlyResize Resize PanelPC2 BNC RGB Setting and Adjusting Other Functions OptionsGetting Information Replacing the FuseSelect Information with the cursor button 5 or ∞ Projector and the wall outletReplacing the Light-Source Lamp Remove the lamp-replacement openingCover by loosening screws HoursTurn on the Main Power switch to go Into stand-by mode Resetting the Lamp Use TimeReset the lamp use time Insert the new light-source lamp fullyTroubleshooting Cleaning and Replacing the Filter CoverMaintenance When warning indication is shown by the blinking indicatorsAction to be taken for warning indication Stopping the projectorMessage Cause Corrective action Command Format Communication SpecificationsControl command table RS-232C external controlFor lens unit GL-M2910G AppendixFor lens unit GL-M2915SG For lens unit GL-M2920ZG 2 toProjector

DLA-M2000LU specifications

The JVC DLA-M2000LU is a cutting-edge projector that epitomizes the advancement in home theater technology. Designed with professional users in mind, the DLA-M2000LU delivers exceptional image quality, making it ideal for commercial venues, screening rooms, and high-end home theaters.

One of the standout features of the DLA-M2000LU is its native 4K resolution, which allows for breathtaking detail and clarity. With a resolution of 4096 x 2160 pixels, this projector excels at rendering intricate textures and vibrant colors with remarkable fidelity. The 4K output is complemented by JVC’s e-Shift technology, which enhances the quality of lower resolution content, upscaling it to near 4K quality. This feature ensures that every viewing experience, whether it’s a blockbuster movie or a sports event, is lifelike and immersive.

The DLA-M2000LU is equipped with JVC’s proprietary D-ILA (Direct-Drive Image Light Amplifier) technology. This innovative technology allows for deeper blacks and superior contrast ratios, providing a more dynamic picture. With a contrast ratio of 100,000:1, users can enjoy rich shadow details and bright highlights, enhancing the overall cinematic experience.

Color reproduction is further enhanced thanks to the projector’s wide color gamut. The DLA-M2000LU supports HDR (High Dynamic Range) content, allowing for a greater range of colors and luminance levels. This capability means that viewers can appreciate the subtleties of color in every scene, which is particularly important for filmmakers aiming to convey their artistic vision.

Another notable characteristic of the DLA-M2000LU is its robust connectivity options. The projector features multiple HDMI inputs, allowing for seamless integration with various media devices. Additionally, it supports various video formats, including DCI-P3, ensuring compatibility with today’s media standards.

In terms of installation, the JVC DLA-M2000LU offers a range of lens options, making it versatile for different room sizes and layouts. The motorized lens shift, zoom, and focus capabilities ensure that users can achieve the optimal screen position with ease.

With its stunning image quality, advanced technologies, and professional grade features, the JVC DLA-M2000LU stands as a premier choice for anyone seeking to enhance their visual experience. Whether it’s for a commercial application or a dedicated home cinema, this projector promises to deliver unparalleled performance and satisfaction.
Top Page Image Contents