JVC DLA-M2000LU manual Setting and Adjusting Other Functions Options, PC2 BNC RGB

Page 31

No.51781

Menu Operations

Setting and Adjusting Other Functions (OPTIONS)

Various functions are provided as shown in the “Options 1” and “Options 2” submenus.

You can set or adjust each function, as required.

1Press the MENU button.

The main menu appears on the screen.

2Select “Options” with the cursor button 5 or ∞, and press 3 or the ENTER button.

The “Options 1” submenu appears on the screen.

Options 1

Menu display

15sec

ON

Line display

5sec

OFF

Keystone

ENTER

 

PC 2 (BNC)

RGB

YPBPR

Options 2

ENTER

 

3Select the item to be adjusted with the cursor button 5 or ∞.

4Make adjustment with the cursor 2 or 3.

•While the keystone item is selected, press the ENTER button to display the “Keystone” submenu.

•To enter the “Options 2” submenu, select “Options 2” with the cursor button 5 or ∞, and press the ENTER button.

•To return to the “Options 1” submenu from the “Options 2” submenu, select “Options 1” with the cursor button 5 or ∞, and press the ENTER button.

Keystone 123

Menu Operations

Adjustment item

Button

 

Adjustment content

 

 

Sets whether to clear the menu display automatically or not.

Menu display

2 or 3

15sec* : Clears the display automatically in about 15 seconds.

 

 

ON

: Does not automatically clear the menu display.

 

 

 

 

 

Sets whether to show the line display (Y/C, VIDEO, PC1, or PC2) on top right of the

Line display

2 or 3

screen or not when the VIDEO or PC button is pressed.

5sec*

: Shows the line display for about 5 seconds.

 

 

 

 

OFF

: Does not show the line display.

 

 

 

 

 

Press the ENTER button to enter the keystone submenu.

 

 

In the keystone submenu, press 2 or 3 to correct trapezoidal distortion of the

 

 

projected image. (–80 ↔ 0* ↔ +128)

Keystone

ENTER

To reset the keystone (trapezoidal distortion of the picture image) to the original

 

 

setting (factory set value: 0), press the PRESET button when the “Keystone”

 

 

submenu appears on the screen.

 

 

To exit the keystone submenu, press the ESCAPE button.

 

 

 

 

 

Sets the input signal source according to the device connected to the PC 2 terminals.

 

 

However, the input will be RGB irrespective of the PC signal setting.

PC2 (BNC)

2 or 3

RGB*

: For a device with analog RGB, V, H/Cs signals

 

 

YPBPR : For a device with component (Y, B-Y, R-Y) or DTV-format (Y, PB, PR)

 

 

 

signals

 

 

 

 

 

Reverses image right-to-left.

Right Left rev.

2 or 3

OFF*

: For the front method.

 

 

ON

: For upside-down hanging from the ceiling.

 

 

 

 

 

Inverses image upside-down.

Top Bottom inv.

2 or 3

OFF*

: For normal setup.

 

 

ON

: For upside-down hanging from the ceiling.

 

 

 

 

 

Sets the baud rate for transmission.

RS-232C [bps]

2 or 3

9600

: 9600 bps

Options 1

Menu display

15sec

ON

Line display

5sec

OFF

Keystone

ENTER

 

PC 2 (BNC)

RGB

YPBPR

Options 2

ENTER

 

ENTER

ENTER

ENTER

Options 2

Right Left rev.

OFF

ON

Top Bottom inv.

OFF

ON

RS-232C [bps]

9600

19200

Sleep time [min]

15 30 60

OFF

Options 1

ENTER

 

 

 

19200* : 19200 bps

Sleep time [min]

2 or 3

Sets the length of sleep time which automatically brings the projector into stand-by

state. You can select one of the sleep times: 15, 30, 60 and 0 (OFF*) minutes.

 

 

 

 

 

* Factory set value

 

 

5Press the ESCAPE button to return to the previous menu or press the MENU button to exit the menu mode.

Note

• Refer to “Removing the Trapezoidal Distortion of the Image” on page 34 for more details about adjusting the keystone.

DEUTSH ENGLISH

1-31

*To adjust multiple items, repeat 3 to 4.

*To reset the keystone (trapezoidal distortion of the picture image) to the original setting, press the PRESET button when the “Keystone” submenu appears on the screen.

52

CAUTION

• Correctly set the “PC2 (BNC)” according to the device connected to the PC2 terminals. However, when the PC signal is

input, RGB input is used irrespective of which setting (YPBPR) is made.

53

ESPAÑ OL ITALIANO FRANÇ AIS

DLA-M2000LU DLA-M2000LE

Page 30 Page 32
Image 31
Page 30 Page 32
Contents DLA-M2000LU Power cord Do not allow any unqualified person to install the unitContents DLA-M2000LE For United Kingdom For European Product should be placed more than one foot awayThis Apparatus Must be Earthed How To Replace The FuseUnited Kingdom only Do not cut off the main plug from this equipmentFor checking operation Remote control unit RM-M2000GAA/R6-size dry cell battery Approx mFront Side / Top Surface / Right Side Controls and FeaturesLeft-hand Side / Rear Side Control Panel on the Projector Bottom SurfaceConnector Panel For remote control only Remote Control UnitInstalling Batteries Installing the ProjectorPrecautions for Installation Installing the Projector against the Screen Adjusting the Inclination of the ProjectorTrapezoidal-distortion correctable maximum angle Projection Distance and Screen Size Setting the Amount of Lens ShiftingUsing as a wireless remote control unit Effective Range and Distance of the Remote Control UnitSetting the Position Selecting Screw for Ceiling Mounting When installing adjusting/setting the unitComputer signals Connecting to Various DevicesSignals that Can Be Input to the Projector Video signalsVideo devices Connecting to Video DevicesConnecting to Hi-Vision Devices BNC-RCADesktop type Connecting to Other DevicesConnecting to Devices which Control the Projector Game device, etcConnection to an IBM PC or IBM-compatible computer Connecting to Computer DevicesConnection to Macintosh Basic Operations Connecting the Power CordRemoving the Lens Cap Projector’s buttons Select the Input source to be Projected Adjusting Sound Volume Language displayAdjust Focus Adjust the Screen Size ZoomingRemoving the Trapezoidal Distortion of the Image Turning off Image and Sound HideQuick Alignment Function Quick Align Menu Operations Remote control unit Displaying a Still Picture FreezeMenu Transition Diagram in No signal Menu Mode Quick Reference Guide for No signal Menu ModeAUTO*/NTSC/NTSC4.43/PAL/SECAM Menu Transition Diagram in Video Menu ModeQuick Reference Guide for Video Menu Mode Submenus in Video Menu ModeQuick Reference Guide for PC Menu Mode Menu Transition Diagram in PC Menu ModeEnter Basic Menu Operation Changing the Language Display Changing the Color System Video Menu Mode OnlySet the color system with the cursor button 5 or ∞ Adjusting Picture Quality Adjusting Tracking / PhasePC submenu Setting submenu Adjusting the Video Screen/Menu PositionAdjusting Color temperature Video submenu Setting 1 submenuResize Panel Changing the Image Tone/Aspect Ratio Video Menu Mode OnlyChanging the Image Size Resize Function PC Menu Mode Only ResizePC2 BNC RGB Setting and Adjusting Other Functions OptionsProjector and the wall outlet Replacing the FuseGetting Information Select Information with the cursor button 5 or ∞Hours Remove the lamp-replacement openingReplacing the Light-Source Lamp Cover by loosening screwsInsert the new light-source lamp fully Resetting the Lamp Use TimeTurn on the Main Power switch to go Into stand-by mode Reset the lamp use timeTroubleshooting Cleaning and Replacing the Filter CoverStopping the projector When warning indication is shown by the blinking indicatorsMaintenance Action to be taken for warning indicationMessage Cause Corrective action RS-232C external control Communication SpecificationsCommand Format Control command tableFor lens unit GL-M2920ZG 2 to AppendixFor lens unit GL-M2910G For lens unit GL-M2915SGProjector

DLA-M2000LU specifications

The JVC DLA-M2000LU is a cutting-edge projector that epitomizes the advancement in home theater technology. Designed with professional users in mind, the DLA-M2000LU delivers exceptional image quality, making it ideal for commercial venues, screening rooms, and high-end home theaters.

One of the standout features of the DLA-M2000LU is its native 4K resolution, which allows for breathtaking detail and clarity. With a resolution of 4096 x 2160 pixels, this projector excels at rendering intricate textures and vibrant colors with remarkable fidelity. The 4K output is complemented by JVC’s e-Shift technology, which enhances the quality of lower resolution content, upscaling it to near 4K quality. This feature ensures that every viewing experience, whether it’s a blockbuster movie or a sports event, is lifelike and immersive.

The DLA-M2000LU is equipped with JVC’s proprietary D-ILA (Direct-Drive Image Light Amplifier) technology. This innovative technology allows for deeper blacks and superior contrast ratios, providing a more dynamic picture. With a contrast ratio of 100,000:1, users can enjoy rich shadow details and bright highlights, enhancing the overall cinematic experience.

Color reproduction is further enhanced thanks to the projector’s wide color gamut. The DLA-M2000LU supports HDR (High Dynamic Range) content, allowing for a greater range of colors and luminance levels. This capability means that viewers can appreciate the subtleties of color in every scene, which is particularly important for filmmakers aiming to convey their artistic vision.

Another notable characteristic of the DLA-M2000LU is its robust connectivity options. The projector features multiple HDMI inputs, allowing for seamless integration with various media devices. Additionally, it supports various video formats, including DCI-P3, ensuring compatibility with today’s media standards.

In terms of installation, the JVC DLA-M2000LU offers a range of lens options, making it versatile for different room sizes and layouts. The motorized lens shift, zoom, and focus capabilities ensure that users can achieve the optimal screen position with ease.

With its stunning image quality, advanced technologies, and professional grade features, the JVC DLA-M2000LU stands as a premier choice for anyone seeking to enhance their visual experience. Whether it’s for a commercial application or a dedicated home cinema, this projector promises to deliver unparalleled performance and satisfaction.
Top Page Image Contents