JVC DLA-M2000LU manual Insert the new light-source lamp fully, Inside and fasten the screws

Page 34

1-34

Replacing the Light-Source Lamp

3 Insert the new light-source lamp fully

Light-source lamp

inside and fasten the screws.

Fasten the two screws with a flat-end screwdriver.

 

Replacing the Light-Source Lamp

■Resetting the Lamp Use Time

After replacing with a new light-source lamp, reset the lamp-time counter inside the projector to clear the accumulated lamp time to zero (0). After resetting, a new count will start for the new light-source lamp.

DLA-M2000LU DLA-M2000LE

CAUTION

■Projector’s button

STANDBY indicator

1Turn on the MAIN POWER switch to go

into stand-by mode.

• Do not touch the glass surface of the light-source lamp

directly with your hand as well as staining it. If you touch

In stand-by mode, the STAND BY indicator on the projector lights up.

with a bare hand, oils and other substances on your hand

 

may adhere to the lamp, possibly preventing it from

 

performing as specified and therefore giving a shortened

 

lamp life, a darkened screen, etc. To handle a new light-

 

source lamp, hold it by the plastic part. Never touch the

Handle

metal part or the front glass surface.

Screw

4HIDE button

3ESCAPE button

STAND BY

LAMP TEMP

 

OPERATE

HIDE

 

 

PC

KEYSTONE

VOLUME

 

VIDEO

PRESET

MENU

ESCAPE

ENTER

OPERATE indicator

1PC button

MENU button

2ENTER button

2Press the following buttons on the projector, sequentially.

1Momentary press the PC button.

2Momentary press the ENTER button.

3Momentary press the ESCAPE button.

4Press and hold the HIDE button for two

seconds or more.

* During this sequence, the STAND BY and OPERATE

indicators alternately blink about every approx. 3

4Replace the lamp-replacement opening

cover and fasten the screws.

Fasten the two screws with a flat-end screwdriver.

CAUTIONS

Lamp-replacement opening cover

Cursor buttons 5/∞

seconds. After completion of the sequence, the

STAND BY indicator alone stays on.

* Buttons must be pressed within 2 seconds of the

previous button.

* When you make a mistake in button operations, return

to the beginning of the sequence.

* To check the lamp time on the menu, press the MENU button

and select “Information” with the cursor button 5 or ∞.

The lamp use time is indicated in the item “Lamp time”.

Video main menu

No.51781

• Install the light-source lamp and close the lamp-replace- ment opening cover correctly; otherwise, a safety switch is activated to prevent the projector from operating.

•If the claw on the lamp-replacement opening cover is dam- aged, the projector may not possibly operate. Then, replace with a new lamp-replacement opening cover.

5Reset the lamp use time.

Be careful not to damage the claw.

Menu

 

 

Image adj.

Input

VIDEO

 

Setting

Switcher

CH.0

 

Color temp.

Source

NTSC

Options

 

 

Language

 

 

 

Lamp time

123 h

Information

 

 

Lamp time (0 h)

ENGLISH

Perform “Resetting the Lamp Use Time” on page 59.

PC main menu

Menu

 

 

 

Image adj.

Input

PC 1

 

Setting

Switcher

CH.0

 

Color temp.

Resolution 1280 1024

Options

Frequency H

79.9

kHz

Language

Frequency V

75

Hz

 

 

 

 

Lamp time

123

h

Information

 

 

 

Lamp time (0 h)

FRANÇ AIS DEUTSH

58

CAUTION

•Reset the lamp use time only when you have replaced with a new light-source lamp. Never reset it during lamp life, otherwise the replacement time may become unclear, and lead to degraded performance or lamp explosion.

59

ESPAÑ OL ITALIANO

Page 33 Page 35
Image 34
Page 33 Page 35
Contents DLA-M2000LU Do not allow any unqualified person to install the unit Power cordContents DLA-M2000LE Product should be placed more than one foot away For United Kingdom For EuropeanDo not cut off the main plug from this equipment How To Replace The FuseUnited Kingdom only This Apparatus Must be EarthedApprox m Remote control unit RM-M2000GAA/R6-size dry cell battery For checking operationFront Side / Top Surface / Right Side Controls and FeaturesLeft-hand Side / Rear Side Bottom Surface Control Panel on the ProjectorConnector Panel Remote Control Unit For remote control onlyInstalling Batteries Installing the ProjectorPrecautions for Installation Installing the Projector against the Screen Adjusting the Inclination of the ProjectorTrapezoidal-distortion correctable maximum angle Setting the Amount of Lens Shifting Projection Distance and Screen SizeWhen installing adjusting/setting the unit Effective Range and Distance of the Remote Control UnitSetting the Position Selecting Screw for Ceiling Mounting Using as a wireless remote control unitVideo signals Connecting to Various DevicesSignals that Can Be Input to the Projector Computer signalsBNC-RCA Connecting to Video DevicesConnecting to Hi-Vision Devices Video devicesGame device, etc Connecting to Other DevicesConnecting to Devices which Control the Projector Desktop typeConnection to an IBM PC or IBM-compatible computer Connecting to Computer DevicesConnection to Macintosh Basic Operations Connecting the Power CordRemoving the Lens Cap Adjust the Screen Size Zooming Adjusting Sound Volume Language displayAdjust Focus Projector’s buttons Select the Input source to be ProjectedRemoving the Trapezoidal Distortion of the Image Turning off Image and Sound HideQuick Alignment Function Quick Align Quick Reference Guide for No signal Menu Mode Remote control unit Displaying a Still Picture FreezeMenu Transition Diagram in No signal Menu Mode Menu OperationsSubmenus in Video Menu Mode Menu Transition Diagram in Video Menu ModeQuick Reference Guide for Video Menu Mode AUTO*/NTSC/NTSC4.43/PAL/SECAMQuick Reference Guide for PC Menu Mode Menu Transition Diagram in PC Menu ModeEnter Basic Menu Operation Changing the Language Display Changing the Color System Video Menu Mode OnlySet the color system with the cursor button 5 or ∞ Adjusting Tracking / Phase Adjusting Picture QualityVideo submenu Setting 1 submenu Adjusting the Video Screen/Menu PositionAdjusting Color temperature PC submenu Setting submenuResize Changing the Image Tone/Aspect Ratio Video Menu Mode OnlyChanging the Image Size Resize Function PC Menu Mode Only Resize PanelSetting and Adjusting Other Functions Options PC2 BNC RGBSelect Information with the cursor button 5 or ∞ Replacing the FuseGetting Information Projector and the wall outletCover by loosening screws Remove the lamp-replacement openingReplacing the Light-Source Lamp HoursReset the lamp use time Resetting the Lamp Use TimeTurn on the Main Power switch to go Into stand-by mode Insert the new light-source lamp fullyCleaning and Replacing the Filter Cover TroubleshootingAction to be taken for warning indication When warning indication is shown by the blinking indicatorsMaintenance Stopping the projectorMessage Cause Corrective action Control command table Communication SpecificationsCommand Format RS-232C external controlFor lens unit GL-M2915SG AppendixFor lens unit GL-M2910G For lens unit GL-M2920ZG 2 toProjector

DLA-M2000LU specifications

The JVC DLA-M2000LU is a cutting-edge projector that epitomizes the advancement in home theater technology. Designed with professional users in mind, the DLA-M2000LU delivers exceptional image quality, making it ideal for commercial venues, screening rooms, and high-end home theaters.

One of the standout features of the DLA-M2000LU is its native 4K resolution, which allows for breathtaking detail and clarity. With a resolution of 4096 x 2160 pixels, this projector excels at rendering intricate textures and vibrant colors with remarkable fidelity. The 4K output is complemented by JVC’s e-Shift technology, which enhances the quality of lower resolution content, upscaling it to near 4K quality. This feature ensures that every viewing experience, whether it’s a blockbuster movie or a sports event, is lifelike and immersive.

The DLA-M2000LU is equipped with JVC’s proprietary D-ILA (Direct-Drive Image Light Amplifier) technology. This innovative technology allows for deeper blacks and superior contrast ratios, providing a more dynamic picture. With a contrast ratio of 100,000:1, users can enjoy rich shadow details and bright highlights, enhancing the overall cinematic experience.

Color reproduction is further enhanced thanks to the projector’s wide color gamut. The DLA-M2000LU supports HDR (High Dynamic Range) content, allowing for a greater range of colors and luminance levels. This capability means that viewers can appreciate the subtleties of color in every scene, which is particularly important for filmmakers aiming to convey their artistic vision.

Another notable characteristic of the DLA-M2000LU is its robust connectivity options. The projector features multiple HDMI inputs, allowing for seamless integration with various media devices. Additionally, it supports various video formats, including DCI-P3, ensuring compatibility with today’s media standards.

In terms of installation, the JVC DLA-M2000LU offers a range of lens options, making it versatile for different room sizes and layouts. The motorized lens shift, zoom, and focus capabilities ensure that users can achieve the optimal screen position with ease.

With its stunning image quality, advanced technologies, and professional grade features, the JVC DLA-M2000LU stands as a premier choice for anyone seeking to enhance their visual experience. Whether it’s for a commercial application or a dedicated home cinema, this projector promises to deliver unparalleled performance and satisfaction.
Top Page Image Contents