JVC DLA-M2000LU manual Replacing the Fuse, Getting Information, Projector and the wall outlet

Page 32

1-32

Menu Operations

Getting Information

You can get information on the input signal, accumulated used hours of light-source lamp, etc.

1Press the MENU button.

The main menu appears on the screen.

2Select “Information” with the cursor button 5 or .

The “Information” will be displayed in the main menu. *No submenu can be selected.

Replacing the Fuse

A fuse is used to protect the power source of the projector. If the fuse is blown, replace it. When the power switch is turned on but no power is supplied to the projector, check the fuse. If there are any unclear points, contact the dealer where you purchased your projector, or consult the Service center.

CAUTION

When replacing the fuse, use the same rating and type (15A 250V). Otherwise, a fire may occur and/or the projector may be damaged.

1Turn off the main power switch and disconnect the power cord from both

the projector and the wall outlet.

In stand-by state (the STAND BY indicator lights on),

DLA-M2000LU DLA-M2000LE

Video main menu

PC main menu

place the MAIN POWER switch of OFF [] position.

Menu

Image adj. Setting Color temp. Options Language

Information

Input

VIDEO

Switcher

CH.0

Source

NTSC

Lamp time

123 h

Menu

Image adj. Setting Color temp. Options Language

Information

Input

PC 1

Switcher

CH.0

Resolution 1280 1024

Frequency H

79.9

kHz

Frequency V

75

Hz

Lamp time

123

h

2Loosen the fuse holder to remove it.

To loosen the fuse holder, use a Philips screwdriver.

Fuse holder

No.51781

Input:

Shows the terminal name selected by the VIDEO or PC button. (Y/C or VIDEO, or PC1 or PC2)

Switcher:

This display currently has no meaning. This is reserved for future use. (“CH.0” is usually displayed to

 

indicate that it is not being used.)

Source:

Shows the projected image’s type of video signal. (Video menu mode)

Resolution:

Shows the resolution of the video signal being received. (PC menu mode)

 

It may not be displayed correctly with some input signals.

Frequency H:

Shows the horizontal frequency of the video signal being received. (PC menu mode)

Frequency V:

Shows the vertical frequency of the video signal being received. (PC menu mode)

Lamp time:

Accumulated used hours of the light-source lamp.

3Press the MENU button to exit the menu mode.

3Remove the fuse from the fuse holder you just removed.

4Install the new fuse (not supplied) into the fuse holder.

5Reinstall the fuse holder into the

projector.

To reinstall the fuse holder, use a Philips screwdriver.

Philips screwdriver

Fuse (15A, 250V)

Fuse holder

Fuse (15A, 250V)

Fuse holder

ESPAÑ OL ITALIANO FRANÇ AIS DEUTSH ENGLISH

54

55

Image 32
Contents DLA-M2000LU Do not allow any unqualified person to install the unit Power cordContents DLA-M2000LE Product should be placed more than one foot away For United Kingdom For EuropeanHow To Replace The Fuse United Kingdom onlyDo not cut off the main plug from this equipment This Apparatus Must be EarthedRemote control unit RM-M2000G AA/R6-size dry cell batteryApprox m For checking operationLeft-hand Side / Rear Side Controls and FeaturesFront Side / Top Surface / Right Side Bottom Surface Control Panel on the ProjectorConnector Panel Remote Control Unit For remote control onlyPrecautions for Installation Installing the ProjectorInstalling Batteries Trapezoidal-distortion correctable maximum angle Adjusting the Inclination of the ProjectorInstalling the Projector against the Screen Setting the Amount of Lens Shifting Projection Distance and Screen SizeEffective Range and Distance of the Remote Control Unit Setting the Position Selecting Screw for Ceiling MountingWhen installing adjusting/setting the unit Using as a wireless remote control unitConnecting to Various Devices Signals that Can Be Input to the ProjectorVideo signals Computer signalsConnecting to Video Devices Connecting to Hi-Vision DevicesBNC-RCA Video devicesConnecting to Other Devices Connecting to Devices which Control the ProjectorGame device, etc Desktop typeConnection to Macintosh Connecting to Computer DevicesConnection to an IBM PC or IBM-compatible computer Removing the Lens Cap Connecting the Power CordBasic Operations Adjusting Sound Volume Language display Adjust FocusAdjust the Screen Size Zooming Projector’s buttons Select the Input source to be ProjectedQuick Alignment Function Quick Align Turning off Image and Sound HideRemoving the Trapezoidal Distortion of the Image Remote control unit Displaying a Still Picture Freeze Menu Transition Diagram in No signal Menu ModeQuick Reference Guide for No signal Menu Mode Menu OperationsMenu Transition Diagram in Video Menu Mode Quick Reference Guide for Video Menu ModeSubmenus in Video Menu Mode AUTO*/NTSC/NTSC4.43/PAL/SECAMEnter Menu Transition Diagram in PC Menu ModeQuick Reference Guide for PC Menu Mode Basic Menu Operation Set the color system with the cursor button 5 or ∞ Changing the Color System Video Menu Mode OnlyChanging the Language Display Adjusting Tracking / Phase Adjusting Picture QualityAdjusting the Video Screen/Menu Position Adjusting Color temperatureVideo submenu Setting 1 submenu PC submenu Setting submenuChanging the Image Tone/Aspect Ratio Video Menu Mode Only Changing the Image Size Resize Function PC Menu Mode OnlyResize Resize PanelSetting and Adjusting Other Functions Options PC2 BNC RGBReplacing the Fuse Getting InformationSelect Information with the cursor button 5 or ∞ Projector and the wall outletRemove the lamp-replacement opening Replacing the Light-Source LampCover by loosening screws HoursResetting the Lamp Use Time Turn on the Main Power switch to go Into stand-by modeReset the lamp use time Insert the new light-source lamp fullyCleaning and Replacing the Filter Cover TroubleshootingWhen warning indication is shown by the blinking indicators MaintenanceAction to be taken for warning indication Stopping the projectorMessage Cause Corrective action Communication Specifications Command FormatControl command table RS-232C external controlAppendix For lens unit GL-M2910GFor lens unit GL-M2915SG For lens unit GL-M2920ZG 2 toProjector

DLA-M2000LU specifications

The JVC DLA-M2000LU is a cutting-edge projector that epitomizes the advancement in home theater technology. Designed with professional users in mind, the DLA-M2000LU delivers exceptional image quality, making it ideal for commercial venues, screening rooms, and high-end home theaters.

One of the standout features of the DLA-M2000LU is its native 4K resolution, which allows for breathtaking detail and clarity. With a resolution of 4096 x 2160 pixels, this projector excels at rendering intricate textures and vibrant colors with remarkable fidelity. The 4K output is complemented by JVC’s e-Shift technology, which enhances the quality of lower resolution content, upscaling it to near 4K quality. This feature ensures that every viewing experience, whether it’s a blockbuster movie or a sports event, is lifelike and immersive.

The DLA-M2000LU is equipped with JVC’s proprietary D-ILA (Direct-Drive Image Light Amplifier) technology. This innovative technology allows for deeper blacks and superior contrast ratios, providing a more dynamic picture. With a contrast ratio of 100,000:1, users can enjoy rich shadow details and bright highlights, enhancing the overall cinematic experience.

Color reproduction is further enhanced thanks to the projector’s wide color gamut. The DLA-M2000LU supports HDR (High Dynamic Range) content, allowing for a greater range of colors and luminance levels. This capability means that viewers can appreciate the subtleties of color in every scene, which is particularly important for filmmakers aiming to convey their artistic vision.

Another notable characteristic of the DLA-M2000LU is its robust connectivity options. The projector features multiple HDMI inputs, allowing for seamless integration with various media devices. Additionally, it supports various video formats, including DCI-P3, ensuring compatibility with today’s media standards.

In terms of installation, the JVC DLA-M2000LU offers a range of lens options, making it versatile for different room sizes and layouts. The motorized lens shift, zoom, and focus capabilities ensure that users can achieve the optimal screen position with ease.

With its stunning image quality, advanced technologies, and professional grade features, the JVC DLA-M2000LU stands as a premier choice for anyone seeking to enhance their visual experience. Whether it’s for a commercial application or a dedicated home cinema, this projector promises to deliver unparalleled performance and satisfaction.