JVC DLA-M4000LU Operating the Setting Menu Operating the Main Menu, Making Basic Settings

Page 16

Operating the Setting Menu

Operating the Main Menu

DLA- DLA-

Making Basic Settings

■Projector’s buttons

SETTING button

In this section, we are making basic picture adjustments which should be performed after installation (connection).

Notes

• The setting menu is displayed when you press the SETTING button

on the projector. After the menu is displayed, you can make settings

Configuration the Main Menu (AV Input) For computer inputs, see the following page.

You can adjust video quality (PICTURE) and etc. using the menus.

The menus are configured as follows:

Main menu (AV inputs : During EXT. IN input signal)

M4000LU M4000LE

MERGENCY AV

RGB

SETTING

QUICK

 

 

 

ALIGN.

QUICK ALIGN. button

■Setting menu

(adjustments).

• If the projector’s position or connections have been changed,

adjustments and settings should be performed again.

• After adjustments, if further picture adjustment is necessary

depending on the equipment connected, use the main menu (pages

33 to 58) to make detailed settings and adjustments.

• For computer-related inputs, use of the quick alignment function

allows automatic adjustment of TRACKING, PHASE, H. POS. and

V. POS. (See pages 30, 36 and 37).

1 Press the SETTING button of the projector.

• The setting menu is displayed on the screen.

PIXEL CLOCK

POSITION

PICTURE

TRACKING

: Normally, no adjustment is required. The lateral size and display area of video image are adjusted.

PHASE

: Normally, no adjustment is required. Flickering or dim video image is adjusted.

V. POS.

: The vertical position of the video image being projected is adjusted.

H. POS.

: The horizontal position of the video image being projected is adjusted.

BRIGHTNESS

: The brightness of the video image being projected is adjusted.

CONTRAST

: The contrast of the video image being projected is adjusted.

SHARPNESS

: The sharpness of the video image being projected is adjusted.

COLOR

: The color density of the video image being projected is adjusted.

TINT

: The tint of the video image being projected is adjusted. (Displayed only for NTSC signal)

ALL RESET

: All the items adjusted are reset.

No.51666

S E T T I N G

 

 

T R A C K I N G

 

1 0

P H A S E

 

0

H . P O S .

 

0

V . P O S .

 

0

F O C U S

–

+

Z O O M

W

T

S I F T L E N S

 

 

Adjustment • setting level

Description of adjustment and setting items

TRACKING

: If wide vertical stripes appear on the screen,

 

adjust the lateral video size and display area

 

so that they disappear. (–255 ↔ 0 ↔ +255)

PHASE

: If characters on the screen flicker or become

2 Press the SETTING button to select the desired item.

•The selected item is shown in magenta color. Each time you press the button, the selected item changes as follows:

TRACKING PHASE H. POS. V. POS.

Menu clearing SIFT LENS ZOOM FOCUS

Memo

To select items using the remote control unit:

Items can be selected using the cursor buttons 5 (backward) or ∞(forward) on the remote control unit. In this case, menu clearing in the above order is not available. The selection changes from SIFT LENS to TRACKING directly.

3 Adjust and set the selected item using the QUICK ALIGN. buttons or .

• To adjust and set multiple items, repeat steps 2 and 3.

OPTIONS

MENU AUTO OFF : Sets whether to turn off menu display automatically (YES) or not (NO).

LINE DISPLAY

: Sets whether to make the line display effective (ON) or not (OFF) for about 5 seconds after input

 

switching.

RIGHT LEFT REV. : Video image is reversed right-to-left.

TOP BOTTOM INV. : Video image is inverted top-to-bottom.

CLAMP

: Sets the clamp pulse’s position at the back porch (BP) or on the sink tip (ST). Normally, the clamp

 

pulse is used at BP. If, with some PCs or workstations, the screen becomes unstable such as

 

being too dark or too bright, try to switch to ST.

RESIZE

: Does not work with AV (video) input. (RESIZE is shown in gray.)

BACK COLOR

: Specifies the background color when there is no video signal. Background color can be selected

 

from BLUE, CYAN, BLACK, GREEN, MAGENTA, RED, and YELLOW.

COLOR TEMP.

: Adjusts the color temperature of the image being projected. Make adjustment when the image

 

becomes reddish or bluish.

 

Color temperature can be set to LOW, MIDDLE, or HIGH.

ASPECT CHANGE : Selects the vertical-to-horizontal ratio of the image projected. The factory-set ratio is 4 : 3. When

 

projecting high-vision video image, a ratio of 16 : 9 can be selected.

SLEEP TIME

: Sets the length of sleep time. A set sleep time after input signal is depleted, the projector goes into

 

a stand-by state. Sleep time can be selected from 10 minutes, 20 minutes, 30 minutes, 60 minutes

 

and 0 minutes. (If you select 0 minutes, the sleep time will be cleared.)

LAMP TIME

: Indicates the accumulated used hours of the light-source lamp.

 

dim, adjust so they become clear.

 

(–127 ↔ 0 ↔ +127)

H. POS.

: If the screen position is displaced to the right

 

or left, adjust the horizontal position of the

 

screen. (–255 ↔ 0 ↔ +255)

V. POS.

: If the screen position is displaced upward or

 

downward, adjust the vertical position of the

 

screen. (–120 ↔ 0 ↔ +120)

FOCUS

: Adjust the focus of video picture.

 

–: Focuses on near points.

 

+: Focuses on farther points.

ZOOM

: Adjust the screen size (angle of view).

 

T : Becomes smaller.

 

W : Becomes larger.

• To reset the adjustment value of the selected item

(TRACKING, PHASE, H. POS. or V. POS.) to the

factory-set value, press the remote control’s PRESET

button. This button does not work for focus and zoom.

Memo

To adjust and set items using the remote control unit:

Items can be adjusted or set by pressing the MENU/ENTER button toward the 2 or 3 mark on the remote control.

4 Clear the setting menu by pressing the SETTING button repeatedly.

Memo

SOURCE

CHANNEL

USER SOURCE SET UP

DISPLAY SIZE

DECODER

:Normally used in AUTO. If use in AUTO is unstable such as color not appearing, the screen being disturbed or the screen being intermitted, set to the dedicated source (forced mode) in accordance with the input signal.

USER allows you to set a source which is uniquely adjusted by the user.

:Sets a line and multiple sources for each channel.

:Sets up an area for the source being input, and registers the user name.

:Adjusts H PIXEL, V PIXEL, H CENTER and V CENTER of video image.

: Normally, set to AUTO. The color system of an input signal is automatically identified and shown in ( ). When use in AUTO is unstable such as no color being shown, set the dedicated color system in accordance with the input signal. You can select from AUTO, NTSC(480i), NTSC4.43, PAL, and SECAM.

SIFT LENS : Adjusts the projected screen position.

∞: Moves it down.

5: Moves it up.

To clear the setting menu using the remote control unit:

You can also clear the setting menu by pressing the PAGE BACK button on the remote control unit.

 

LANGUAGE

: Text on the screen can be changed to a language other than English. Languages that can be displayed are the

 

 

 

following six :

(Japanese), ENGLISH, DEUTSCH (German), ESPAÑOL (Spanish), ITALIANO (Italian), and

 

 

FRANÇAIS (French). However, some text such as “QUICK ALIGNMENT”, etc. are shown only in English.

30

31

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Operating For customer UseAbout burning-in of the D-ILA device Lamp directly by opening the cabinet while the illuminationContents Accessories Controls and Features Controls and FeaturesFront Side / Top Surface / Right Side Left-hand side / Back SideControl Panel Connector Panel Remote Control UnitInstalling Batteries Install the batteriesMenu / Enter Menu Operation Button Open the back coverInstalling the Projector Precautions for InstallationInstalling the Projector Relationship relative to Glass SurfaceLens Shift Function Change of projection screen accordingTo aspect ratio ScreenConnecting to Various Devices Signals that Can Be Input to the ProjectorAdjustable range of the lens Projection Distances and Screen SizesDesktop type Example of a basic systemRGB output devices Connecting to Devices which Control the Projector Connecting the Power Cord SuppliedPower cord into a wall outlet, Insert the plug of the suppliedWhen Turning On the Devices Connected to the Projector Turning on the PowerTurning off the Power Basic OperationsAdjust the screen size Adjust focusFor Operating Other Functions Basic OperationsTo display the Setting menu To use the remote control’s Preset buttonProjector’s button To display Channel on the screenOperating the Setting Menu Operating the Main Menu Making Basic SettingsPress the Setting button of the projector Press the Setting button to select the desired itemConfiguration of the Main Menu Computer-related input Operating the Main Menu Basic Operation of the Main MenuChanging the Color System Changing the Language DisplayPress MENU/ENTER toward the 5 or ∞ mark to select Decoder Press MENU/ENTER toward the 2 or 3 mark to setAdjusting the Pixel Clock Adjusting the Screen PositionAdjustment item Button Adjustment content To return to the main menu, pressAdjusting Picture Quality Submenu itemsSetting and Adjusting Other Functions Options Following optional functions can be set adjustedAbout the lamp use time Picture menuDisplay, the video image resolution becomes coarse Adjustment item ButtonOptions menu Press MENU/ENTER to set fix Changing Setting the SourcePress the MENU/ENTER button Submenu Press the MENU/ENTER button to set Setting Up ChannelsPress MENU/ENTER to set Setting Up Channels Line setup Setting Up Channels Source setupChannel setup selection menu When Line is selectedWhen a switcher number SWNo is selected Setting Up Channels SWNo. setupPress the page Back button to set Changing Channels CH Change Setting Up or Changing User Sources Setting Up or Changing the Display Size Remote control unit Press the MENU/ENTER button to setMark to select a submenu item Cleaning and Replacing the Filter Remove the filter cover screwsRemove the filters To return to the main menu, press page BACK. To finishTroubleshooting Clean the filtersReinstall the filters About Light-Source Lamp ReplacementWhen the emergency indicator starts blinking TroubleshootingSpecifications SpecificationsEXT. in AV in input RGB in RGB inputDTV-format signals DLA-M4000LE Instructions Victor Company of JAPAN, LimitedImproper adjustment of controls may result in damage Important InformationContents Controls and Features On When the projector is in operation projecting On When in stand-by mode Blinking When in cool-down modeTemp indicator Input of external sync signals is automatically detected 51666 305 mm 600 mm 11.392 Type
Related manuals
Manual 68 pages 40.21 Kb
Top Page Image Contents