JVC DLA-M4000LU operating instructions Specifications, EXT. in AV in input, RGB in RGB input

Page 33

No.51666

Specifications

Optical mechanism system

• Projection method

3D-ILA device, 1 lens, 3 primary color optical shutter method

D-ILA device

0.9" measured diagonally (1365 1024 pixels) 3 (Total number of pixels : 4,193,280)

• Projecting lens

GL-M4023SZ 3:1~7:1 zoom lens

(separately available)

GL-M4015S 1.5:1 fixed focus lens

• Screen size

60" to 300" [recommended] to 600" [maximum] measured diagonally (*with aspect ratio : 4 : 3)

Light-source lamp

1.6 KW xenon lamp

Electrical system

• Color system

NTSC, NTSC4.43, PAL, SECAM (* Automatic switching / manual switching)

• Resolution

1365 1024 dots

(*S-XGA full resolution, during RGB input)

 

1000TV lines (*Horizontal resolution, aspect ratio 4 : 3, during video input)

• Scanning frequency

Horizontal frequency : 15 kHz ~ 82 kHz

 

Vertical frequency

: 50 Hz ~ 78 Hz

Input / output

[EXT. IN (AV IN input)]

* The Y/C (S-video) and VIDEO (composite video) signals can be input with the video board

 

installed.

 

• Y/C

1-line, mini-DIN 4 pin 1 (* With the video board, separately available, installed)

 

Y (luminance signal)

: 1V(p-p), 75Ω (negative sync)

 

C (chroma signal)

: 0.286V(p-p) (burst signal), 75Ω [NTSC]

 

 

: 0.3V(p-p) (burst signal), 75Ω [PAL]

• VIDEO

1-line, BNC 1 (* With the video board, separately available, installed)

 

Composite video signal

: 1V(p-p), 75Ω (negative sync)

• Y, PB/B-Y, PR/R-Y

1-line, BNC 3

 

Component (Y,B-Y,R-Y) signals

Y: 1V(p-p), 75Ω (negative sync or 3-value sync) PB/B-Y : 0.7V(p-p), 75Ω

PR/R-Y : 0.7V(p-p), 75Ω

DTV-format signals

[480i (ITU-R BT. 601-4), 480p (SMPTE 293M)]

Y: 1V(p-p), 75Ω (negative sync) PB, PR : 0.7V(p-p), 75Ω

[720p (SMPTE 296M), 1080i (SMPTE 274M)]

Y: 1V(p-p), 75Ω (3-value sync) PB, PR : 0.7V(p-p), 75Ω

[RGB IN (RGB input)]

 

 

 

• RGB IN-1 (PC)

1-line, D-sub 3-row 15 pin 1

 

Analog RGB signal

 

 

R

: 0.7V(p-p), 75Ω

 

B

: 0.7V(p-p), 75Ω

 

G

: 0.7V(p-p), 75Ω

 

G on Sync

: 1V(p-p), 75Ω (negative sync)

 

Sync signal

: 1V(p-p) to 5V(p-p), high impedance (positive/negative polarity)

 

* Some connected devices may not correspond to composite sync (Cs) or G on sync signal.

• RGB IN-2

1-line, BNC 5

 

Analog RGB signal

 

 

R

: 0.7V(p-p), 75Ω

 

B

: 0.7V(p-p), 75Ω

 

G

: 0.7V(p-p), 75Ω

 

G on sync

: 1V(p-p), 75Ω (negative sync)

Specifications (Cont.)

 

Horizontal sync/composite sync signal (H/Cs)

 

H

: 1V(p-p) to 5V(p-p), high impedance (positive/negative polarity)

 

Cs

: 1V(p-p) to 5V(p-p), high impedance (positive/negative polarity)

 

Vertical sync signal (V)

 

V

: 1V(p-p) to 5V(p-p), high impedance (positive/negative polarity)

 

* Some connected devices may not correspond to composite sync (Cs) or G on sync signal.

[RGB OUT (RGB OUTPUT)]

 

• RGB OUT

1-line, D-sub 3-row 15-pin 1

 

Analog RGB signal

 

R

: 0.7V(p-p), 75Ω

 

B

: 0.7V(p-p), 75Ω

 

G

: 0.7V(p-p), 75Ω

 

G on sync : 1V(p-p), 75Ω (negative sync)

 

Horizontal sync/composite sync signal (H/Cs)

 

H

: TTL level (Polarity : Same for input)

 

Cs

: TTL level (Polarity : Same for input)

 

Vertical sync signal (V)

 

V

: TTL level (Polarity : Same for input)

[CONTROL]

 

 

RS-232C

: 1-line, D-sub 9-pin 1

 

* RS-232C-interface specified control terminal for controlling this projector with a personal

 

computer.

• REMOTE

: 1-line, mini-jack 1

General

 

 

• Power requirements

 

AC 220 V~240 V, 50 Hz/60 Hz

• Power consumption

 

12 A (at 220V)

• Allowable operation temperature

+ 5°C to + 40°C (41°F to 104°F)

• Allowable relative humidity

90% or less (no condensation)

• Allowable storage temperature

– 5°C to + 60°C (23°F to 140°F)

• Maximum outside dimensions

Approx. (W)687 mm (H)420 mm (D)793 mm (27-1/16˝ 16-9/16˝ 31-1/14˝)

 

 

(excluding protruding parts)

• Weight

 

Approx. 70.0kg (154 lbs.)

• Accessories

 

(Refer to page 5.)

*Design and specifications are subject to change without notice.

*D-ILA devices are manufactured with a very high-precision technology, allowing 99.99% of the pixels to be effective. Only 0.01% or less of the pixels are missing or always on.

*For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be more or less different from actual products.

*TRADEMARKS

IBM ,IBM PC, and VGA are registered trademarks of International Business Machines Corporation. Macintosh is registered trademarks of Apple Computer, Inc.

VESA is a trademark of the non-profit organization Video Electronics Standard Association.

All other product names mentioned herein are used for identification purposes only, and may be the trademarks or registered trademarks of their respective companies.

DLA- DLA-

64

65

M4000LU M4000LE

Image 33
Contents For customer Use OperatingLamp directly by opening the cabinet while the illumination About burning-in of the D-ILA deviceContents Accessories Controls and Features Controls and FeaturesFront Side / Top Surface / Right Side Left-hand side / Back SideControl Panel Remote Control Unit Connector PanelInstall the batteries Installing BatteriesMenu / Enter Menu Operation Button Open the back coverPrecautions for Installation Installing the ProjectorInstalling the Projector Relationship relative to Glass SurfaceChange of projection screen according Lens Shift FunctionTo aspect ratio ScreenSignals that Can Be Input to the Projector Connecting to Various DevicesAdjustable range of the lens Projection Distances and Screen SizesExample of a basic system Desktop typeRGB output devices Connecting the Power Cord Supplied Connecting to Devices which Control the ProjectorPower cord into a wall outlet, Insert the plug of the suppliedTurning on the Power When Turning On the Devices Connected to the ProjectorTurning off the Power Basic OperationsAdjust focus Adjust the screen sizeFor Operating Other Functions Basic OperationsTo use the remote control’s Preset button To display the Setting menuProjector’s button To display Channel on the screenMaking Basic Settings Operating the Setting Menu Operating the Main MenuPress the Setting button of the projector Press the Setting button to select the desired itemOperating the Main Menu Basic Operation of the Main Menu Configuration of the Main Menu Computer-related inputChanging the Language Display Changing the Color SystemPress MENU/ENTER toward the 5 or ∞ mark to select Decoder Press MENU/ENTER toward the 2 or 3 mark to setAdjusting the Screen Position Adjusting the Pixel ClockAdjustment item Button Adjustment content To return to the main menu, pressSubmenu items Adjusting Picture QualityFollowing optional functions can be set adjusted Setting and Adjusting Other Functions OptionsAbout the lamp use time Picture menuAdjustment item Button Display, the video image resolution becomes coarseOptions menu Changing Setting the Source Press MENU/ENTER to set fixPress the MENU/ENTER button Submenu Setting Up Channels Press the MENU/ENTER button to setPress MENU/ENTER to set Setting Up Channels Source setup Setting Up Channels Line setupChannel setup selection menu When Line is selectedSetting Up Channels SWNo. setup When a switcher number SWNo is selectedPress the page Back button to set Changing Channels CH Change Setting Up or Changing User Sources Remote control unit Press the MENU/ENTER button to set Setting Up or Changing the Display SizeMark to select a submenu item Remove the filter cover screws Cleaning and Replacing the FilterRemove the filters To return to the main menu, press page BACK. To finishClean the filters TroubleshootingReinstall the filters About Light-Source Lamp ReplacementTroubleshooting When the emergency indicator starts blinkingSpecifications SpecificationsEXT. in AV in input RGB in RGB inputDTV-format signals Victor Company of JAPAN, Limited DLA-M4000LE InstructionsImportant Information Improper adjustment of controls may result in damageContents Controls and Features On When in stand-by mode Blinking When in cool-down mode On When the projector is in operation projectingTemp indicator Input of external sync signals is automatically detected 51666 305 mm 600 mm 11.392 Type
Related manuals
Manual 68 pages 40.21 Kb