JVC DLA-M4000LU operating instructions Contents, Accessories

SAFETY PRECAUTIONS (Cont.)

Contents

No.

POWER CONNECTION

(United Kingdom only)

WARNING

Do not cut off the main plug from this equipment.

If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adapter or consult your dealer.

If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the main supply.

If a new main plug has to be fitted, then follow the instruction given below:

WARNING:

THIS APPARATUS MUST BE EARTHED.

IMPORTANT:

The wires in the mains lead on this product are coloured in accordance with the following cord:

Green and Yellow	: Earth
Blue	: Neutral
Brown	: Live

As these colours may not correspond with the coloured making identifying the terminals in your plug, proceed as follows:

The wire which is coloured green-and-yellow must be connected

to the terminal which is marked with the letter E or the safety earth or coloured green or green-and-yellow.

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

When replacing the fuse, be sure to use only a correctly rated approved type, re-fit the fuse cover.

IF IN DOUBT —— CONSULT A COMPETENT

ELECTRICIAN.

SAFETY PRECAUTIONS	2
Accessories	5
Controls and Features	6
Front Side / Top Surface / Right Side	6
Left-hand side	7
Control Panel	8
Connector Panel	10
Remote Control Unit	11
MENU / ENTER (Menu Operation) Button	13
Installing Batteries	13
Installing the Projector	14
Precautions for installation	14
Relationship relative to Glass Surface	15
Lens Shift Function	16
Projection Distance and Screen Size	18
Connecting to Various Devices	19
Signals that Can Be Input to the Projector	19
Examples of System Configuration	20
Connecting to Computer Devices	21
Connecting to Devices which Control the
Projector	22
Connecting the Power Cord (Supplied)	23
When Turning On the Devices Connected to the
Projector	24

Operating the Setting Menu	30
Making Basic Settings	30
Operating the Main Menu	31
Configuration of the Main Menu	31
Operating the Main Menu (Basic Operation of the
Main Menu)	33
Changing the Color System	34
Changing the Language Display	35
Adjusting the Pixel Clock	36
Adjusting the Screen Position	37
Adjusting Picture Quality	38
Setting and Adjusting Other Functions
(OPTIONS)	41
Setting Up Channels	47
Setting Up Channels (LINE setup)	48
Setting Up Channels (SOURCE setup)	49
Changing Channels (CH change)	52
Setting Up (or Changing) User Source	54
Setting Up (or Changing) the Display Size	57
Filter Maintenance and Light-Source
Lamp Replacement	59
Cleaning and Replacing the Filter	50
About Light-Source Lamp Replacement	60
Cleaning and Replacing the Filter	51

51666

Basic Operations	26	Troubleshooting	52
		Specifications	54
1. Turning on the Power	26
2. Select the video input to be projected	27
3. Adjust the screen size	27

Information on the power cord plug

The power cord of this projector does not have a wall outlet plug attached. We recomend you to select and attach a plug which matches your wall outlet.

Use a plug rated 250V/20A.

The wires ends of the power cord are covered for protection. Remove the covers before attaching the plug to the power cord.

4. Adjust focus	28
• For Operating Other Functions	27

Accessories

The following accessories are included with this projector. Check for them; if any item is missing, please contact your

dealer.

	Remote control unit	AA/R6-size dry cell battery (⋅2)	Power code	Remote control cable
	(RM-M4000G)	(for checking operation)	[approx. 3.35 m]	(approx. 15 m)
	Memo
	In addition to the above accessories, an operator manual (this book) and warrantee sheet are included. If any is missing, also
	contact your dealer.
4				5

DLA-M4000LU DLA-M4000LE