JVC DLA-M4000LU Controls and Features, Front Side / Top Surface / Right Side, No.51666, Cautions

Page 4
Controls and Features

Controls and Features

Front Side / Top Surface / Right Side

 

 

1

1

 

2

 

 

3

7

 

 

 

 

4

6

1

5

Controls and Features (cont.)

Left-hand side / Back Side

p

 

 

9

 

 

8

 

q

 

 

 

3

8

 

 

DLA-M4000LU DLA-M4000LE

No.51666

1Adjustable foot

It is set at the shortest position when shipped from the factory. Turn the foot to make the projector level. Adjustment can be made in the range of ±4° from the vertical and ±5° from the horizontal.

2Connector panel

For details, refer to “Connector Panel” on page 10.

3Air intake area (filter)

Air is taken in through this area to cool the light-source lamp. If this area is blocked or if something that obstructs taking in or exhausting air is placed around the projector, heat may build up inside and could cause a fire. For details, refer to “Precautions for Installation” on page 14.

CAUTIONS

•Be careful as paper, cloth or soft cushion could be drawn in if placed nearby. Do not block the intake area, or heat may build up and could cause a fire.

•Clean the filter periodically. For details, refer to “Cleaning and Replacing the Filter” on page 59.

Deposition of dirt on the filter works to reduce the cooling effect, causing heat to build up inside, which could cause a fire or malfunction.

4AC IN (power input) terminal

This is the power input terminal where the supplied power cord is connected. For details, refer to page 23.

5MAIN POWER switch

This is the main power switch. When it is turned on, the projector goes into stand-by state, and the STAND BY indicator on the control panel comes on.

ON [ ❙ ]: The main power turns on.

OFF [‡]: The main power turns off.

6Remote sensor

When operating with the remote control, aim it toward this sensor. An additional remote sensor is provided on the back of the projector. The effective operating distance of the remote control is 10 m from each of the sensors. The effective operating range of angles is 50° left and right, and 15° up and down.

7Lens mount

Attach a projection lens separately sold to this mount.

GL-M4023SZ 3 : 1~7 : 1 zoom lens

GL-M4015S 1.5 : 1 fixed-focus lens

For information on attaching the lens, consult the dealer or service center who performed the installation and adjustments of your projector.

8Exhaust vents

Vents for cooling fans through which warm air comes out.

9Control panel

For details, refer to “Control Panel” (page 8 and 9).

pRemote sensor

When operating with the remote control, aim it toward this sensor. An additional remote sensor is provided on the front of the projector. The effective operating distance of the remote control is 10 m from each of the sensors. The effective operating range of angles is 50° left and right, and 15° up and down.

qAir exhaust port

Warm air comes out of this port from the cooling fan for the light-source lamp power supply. This fan continues running as long as the MAIN POWER switch is on.

6

7

Page 3 Page 5
Image 4
Page 3 Page 5
Contents No.51666 DLA-M4000LU SUPERPROJECTOR Model No. DLA-M4000LUSAFETY PRECAUTIONS IMPORTANT INFORMATION IMPORTANT SAFEGUARDSSAFETY PRECAUTIONS Cont DO NOT allow any unqualified person to install the unitContents AccessoriesFilter Maintenance and Light-Source Operating the Setting MenuControls and Features Controls and Features contFront Side / Top Surface / Right Side Left-hand side / Back SideControl Panel Cont Control PanelNo.51666 Remote Control Unit Connector PanelControls and Features Cont Installing Batteries Install the batteriesPrecautions for using batteries MENU / ENTER Menu Operation ButtonInstalling the Projector Precautions for InstallationPrecautions for Installation Cont Installing the Projector ContLens Shift Function Lens Shift Function ContRelational table for maximum shift amounts aspect ratio 4 Relational table for maximum shift amounts aspect ratio 16Connecting to Various Devices Signals that Can Be Input to the ProjectorAdjustable range of the lens Video signalsExamples of System Configuration Connecting to Computer DevicesConnecting to Various Devices Cont.Connecting to Various Devices Cont Example of a basic systemConnecting to Devices which Control the Projector Connecting the Power Cord Suppliedpower cord into a wall outlet, and Connecting to Various Devices ContWhen Turning On the Devices Connected to the Projector 1. Turning on the PowerTurning off the Power Power switch of AV devices which provide input to the projector3. Adjust the screen size 4. Adjust focusFor Operating Other Functions Basic Operations ContTo display the SETTING menu To use the remote control’s PRESET buttonProjector’s button To display “CHANNEL” on the screenOperating the Setting Menu Making Basic Settings1 Press the SETTING button of the projector 2 Press the SETTING button to select the desired itemConfiguration of the Main Menu Computer-related input Remote control unit3 Set adjust the item Operating the Main Menu Basic Operation of the Main MenuChanging the Color System Changing the Language Display2 Press MENU/ENTER toward the 5 or ∞ mark to select “DECODER” 3 Press MENU/ENTER toward the 2 or 3 mark to setAdjusting the Pixel Clock Adjusting the Screen Position3 Press the MENU/ENTER button To return to the main menu, press the PAGEAdjusting Picture Quality Adjusting Picture Quality ContWhen AV signals are input When computer-related signals are inputSetting and Adjusting Other Functions OPTIONS Setting and Adjusting Other Functions OPTIONS Cont Changing Setting the Source Changing Setting the Source ContWhen a source setting “A UTO” is selected When a source setting “DEDICA TED SOURCE” isSetting Up Channels When a source setting “USER” is selectedThe “USER SOURCE setup menu” is displayed “CHANNEL”Setting Up Channels LINE setup Setting Up Channels SOURCE setupCHANNEL setup selection menu CHANNEL setup selection menuSetting Up Channels SOURCE setup Cont Setting Up Channels SWNo. setup1 Press MENU/ENTER toward the 2 or 3 mark to select a switcher number When a switcher number “SWNo” is selectedChanging Channels CH Change Cont Changing Channels CH Change5 Press the MENU/ENTER button to set Setting Up or Changing User Sources Setting Up or Changing User Sources ContSOURCE SETUP” Press the MENU/ENTER buttonSetting Up or Changing the Display Size 6 Press the MENU/ENTER button to setmark to select a submenu item “DISPLAY SIZE”Filter Maintenance and Light-Source Lamp Replacement Setting Up or Changing the Display Size ContCleaning and Replacing the Filter 2 Remove the filter cover screwsTroubleshooting Cleaning and Replacing the Filter Cont4 Clean the filters 5 Reinstall the filtersWhen the emergency indicator starts blinking Troubleshooting ContSpecifications Specifications ContOptical mechanism system Electrical systemOutside dimensions Pin assignment Specifications for terminalsDTV-format signals Specifications ContDLA-M4000LE INSTRUCTIONS DLA-M4000LE SUPER PROJECTORSUPER PROJECTOR IMPORTANT SAFEGUARDS IMPORTANT INFORMATIONTHIS APPARATUS MUST BE EARTHED MACHINE NOISE INFORMATION Germany onlyPOWER CONNECTION Information on the power cord plugSAFETY PRECAUTIONS Connecting to Various DevicesControls and Features Controls and Features contDLA-M4000LU DLA-M4000LE No.51666Controls and Features cont Controls and Features contDLA-M4000LU DLA-M4000LE Control PanelConnector Panel Remote Control UnitControls and Features cont Controls and Features ContRemote Control Unit Installing BatteriesInstall the batteries Controls and Features ContInstalling the Projector Precautions for InstallationPrecautions for Installation Cont Installing the Projector ContInstalling the Projector Cont Installing the Projector ContNo.51666 DLA-M4000LU DLA-M4000LEConnecting to Various Devices Signals that Can Be Input to the ProjectorInstalling the Projector Cont Adjustable range of the lens
Related manuals
Manual 68 pages 40.21 Kb
Top Page Image Contents