Controls and Features
Front Side/Top Surface/Bottom Surface
A
F
| B |
B | Bottom Surface |
C | D |
E
ENGLISH
G
H
A Indicator
Please refer to AIndicatorsB (A Page 14) for details.
B Air Inlets (2 in front and 1 at bottom surface)
The air inlets absorb air to cool the interior of the unit. Do not block or allow warm air to blow into them. This may cause the unit to malfunction.
C Power Zoom Lens
●Before projection, remove the lens cap. (A Page 26)
D Remote Sensor (Front)
When operating with the remote control, aim it towards the sensor. (A Page 23)
●A remote sensor is also located on the rear of the unit.
G
E Lens Cap
●Fit the cap on the lens when this unit is not in use to prevent the lens from becoming dirty. (A Page 26)
F Lens Shift Cover
Remove this cover when using the Lens Shift feature for shifting the projecting position in the vertical direction. (A Page 22)
G Foot
It is set at the lowest position when shipped from the factory. This unit does not come with a function to adjust the gradient.
H Filter
Cleans air drawn in from the air inlet. Please clean this filter regularly. (A Page 39)
11