JVC DLA-HD10KU/E, DLA-HD10KSU/E manual Terminal Description, External control command table

Terminal Description (continued)

C Parameters used for the data format

The following 3 types of parameters are used for command and response data:

(1) Numeric value (2) ON/OFF (3) Special parameters Each parameter is as follows:

(1) Numeric value

A 2-byte hexadecimal value (sign included) is represented by a set of 4-digit (4-byte) characters. The range that can be specified is from A8000HB to A7FFFHB

(2) ON/OFF

Shows the status (ON or OFF) of the unit, such as POWER and HIDE.

Character	Hex	Meaning
0	30	OFF
1	31	ON

(3)Special parameters Operation mode parameters

Character	Hex	Meaning
0000	30h 30h 30h 30h	Standby mode
0001	30h 30h 30h 31h	Operate mode
0002	30h 30h 30h 32h	Cool down mode
0004	30h 30h 30h 34h	Emergency mode

cExternal control command table

Function	Command	Asking			Data Type
		Operate mode	ELSE	Numeric Value		ON/OFF	Special Data
Operate	U0F					X	
HIDE	U00	X				X	
Left/Right Reversal	U17	X				X	
Top/Bottom	U18	X				X	
Inversion
Operation Mode	Z03	X	X				X

Operation mode: Only Asking command is possible

46