About Burning-in of D-ILA Device

Caution

oDo not allow the same still picture to be projected for a long time or an abnormally bright video image to be projected

Do not project still images, etc. with a high intensity or high contrast on the screen for a long time. This video image could be burnt into this D-ILA device.

Pay special attention when projecting video games and computer program images.

There is no problem with ordinary video cassette playback images.

Viewing Conditions (Brightness of Room)

oBrightness of the room

Avoid direct exposure of screen to direct sunlight and illumination. Block light using a curtain. Images can be well projected by darkening the brightness of the room.

oDo not view screen for prolonged hours

Looking at the screen continually for a prolonged time will cause your eyes to get tired. Allow your eyes to rest at intervals.

oDo not use this unit when image flickers

This may cause your eyesight to deteriorate.

Maintenance Procedures

oClean dirt on the cabinet

with a soft cloth. In case of heavy soiling, soak a cloth in neutral detergent diluted with water, wring dry and wipe, followed by wiping again using a dry cloth.

oPay attention to the following as the cabinet may deteriorate in condition, get damaged or paint may come off.

●Do not wipe with a stiff cloth

●Do not wipe with force

●Do not wipe with thinner or benzene

●Do not spray volatile chemicals like insecticide

●Do not allow prolonged contact with rubber or plastic products

oDirt on the lens

shall be cleaned using commercial blowers or lens cleaning papers (for cleaning glasses and cameras). Do not use fluid-type cleaning agents. This may lead to peeling of the surface coating film.

Lens surface is fragile. Avoid rubbing it hard or knocking it.

ENGLISH

Environment of Use

oDo not use this unit in rooms with cigarette smoke or oily smoke

Do not use this unit in rooms with cigarette smoke or oily smoke. This may cause the unit to malfunction.

oWhen mounting this unit to the ceiling

Check temperature around the unit.

When a heater is in use, the ceiling may reach a temperature higher than anticipated, hence leading to malfunction of the unit.

Standard for gauging replacement time of components

There are replacement components required for maintenance of the functions of this product such as optical components, cooling fan and filters. Life span of components varies considerably with the frequency of use and environment in which they are used. For replacement of components (except filters), please consult your authorized dealer.