JVC DLA-HD10KU/E Lens Shift Setting, Project the image on the screen, Remove the lens shift cover

Approx. 60% (upward maximum)

Approx. 50% (default position)

Approx. 0% (downward maximum)

Shift Adjustment Screw

Installing the Projector (continued)

Lens Shift Setting

This unit comes with a Lens Shift feature that enables upward/downward adjustment of the projection screen position. Adjust accordingly depending on the installation conditions.

●The shift level is between 0 % and 60 %. The shift level is set to 50 % as the default.

●The position of the projection screen may be out of alignment due to the gear movement.

●When lens shift setting (adjustment) is completed, mount the lens shift cover to this unit.

aProject the image on the screen

●Please refer to ABasic Operation ProceduresB

(A Page 26) on the method of projection.

Lens Shift Cover

b Remove the lens shift cover

● Remove the lens shift cover from this unit using a G screwdriver.

c Adjust the projection screen position		Shift Upwards	Shift Downwards
● Turn the shift adjustment screw using a G screwdriver
and adjust accordingly.
Turn clockwise	: Screen shifts upwards.

Turn anti-clockwise : Screen shifts downwards.

d Mount the lens shift cover	oProjection screen position image according to
● Mount the lens shift cover to this unit using a G		shift level
screwdriver.			● The projection screen posi-
			tion only shifts vertically.
			The slight horizontal dis-
			placement shown in the
			diagram is illustrative.

22