Loading Batteries into the Remote Control
Load batteries into the remote control. If the remote control starts to function erratically, replace the batteries.
a Open the back cover | Precautions for Using Batteries |
|
ENGLISH
Press the back cover slightly and slide it in the direction of the arrow.
bLoad the batteries
Insert the 2 (AAA) batteries supplied according to the F, G marks. To prevent short circuit, be sure to insert the G (minus) end of the battery first.
If batteries are incorrectly used, they may crack or leak. This could cause fire, burn, malfunction, and staining or damaging of the surroundings. Beware of the following:
●Do not mix new and old batteries.
●Do not mix different type of batteries as they are different in characteristics.
●Insert batteries according to the FG marks on the battery case.
●Be sure to insert the minus G end in first to prevent short circuit.
●Do not put batteries into fire or recharge them.
●Use only designated batteries.
●Remove the batteries if the remote control is not to be used for a prolonged period.
●Use manganese batteries wherever possible. Do not use rechargeable, alkaline batteries.
●Read the cautions displayed on the batteries.
Battery Life
Batteries last for 6 months to 1 year under normal use. However, batteries provided are for confirming operation and may not last that long. When the remote control fails to operate properly, replace the batteries with new ones.
Battery Leakage
When the batteries are totally exhausted and can no longer be used, replace them immediately.
Leaving the batteries in the battery compartment causes leakage, which may in turn lead to malfunction.
cClose the back cover
Slide in the direction of the arrow to close the back cover.
17