Knoll Systems LED1081 user manual Function Command Action on unit, Operation Command Values

•Operations Commands

The following example is the syntax for operations commands: op <operation> <command> [CR]

No.	Function			Command			Action on unit
1	Set		= <value>			Makes the unit take that value.
2	Get		?			Asks what the current value is.
3	Increment		+			Adds 1 to the current value.
4	Decrement		-			Subtracts 1 from the current value.
5	Execute		(none)			Performs an action.
			Table 6-2: Operations Command Functions
Operation		Command			Values			Notes
				0	= 16:9
				1	= Letterbox
aspect		= ?		2	= 4:3
				3	= 4:3 Narrow
				4	= Native
				0	= User Memory 1
memory		= ?		1	= User Memory 2
				4	= Default
save.mem		=		0	= User Memory 1
				1	= User Memory 2
bright		= ? + -		0	- 200
contrast		= ? + -		0	- 200
saturat		= ? + -		0	- 200
tint		= ? + -		0	- 200
sharp.simple		= ? + -		0	- 200
sharp.mode		= ?		0	= Simple
				1	= Advanced
horiz.sharp		= ? + -		0	- 200
vert.sharp		= ? + -		0	- 200
diag.sharp		= ? + -		0	- 200
sharp.over		= ? + -		0	- 200
horiz.text		= ? + -		0	- 200
vert.text		= ? + -		0	- 200
diag.text		= ? + -		0	- 200
text.over		= ? + -		0	- 200
noise.thresh		= ? + -		0	- 200
nr.simple		= ? + -		0	- 200
nr.mode		= ?		0	= Simple
				1	= Advanced
nr.general		= ? + -		0	- 200
block.reduct		= ? + -		0	- 200
mosq.noise		= ? + -		0	- 200

60Serial Interface Specifications