Replacing the lamp unit
8. Insert the power cord plug into the wall outlet and then press the MAIN POWER switch.
Caution
•If the power does not turn on even after turning the MAIN POWER switch “I”, turn the MAIN POWER “O”, confirm that the lamp unit and door are installed correctly, and turn on again.
9.Press the “POWER” button so that a picture is projected onto the screen.
10.Press the “MENU” button to display the MAIN MENU screen, and then press the 
and 
buttons to move the cursor to select “OPTION2”.
MENU
INDEX WINDOW
PICTURE
POSITION
AUDIO
ZOOM/FOCUS
LANGUAGE
OPTION 1
OPTION 2
SELECT |
|
|
|
|
| ENTER |
|
|
|
11.Press the “ENTER” button to display the “OPTION2” screen, and then use the 
and 
buttons to select “LAMP RUNTIME”.
12.Press and hold the “ENTER” button on the projector or the remote control for approximately 3 seconds.
The “LAMP RUNTIME” will change to “L1 RESET [POWER OFF]” or “L2 RESET [POWER OFF]”.
Note
•If the “MENU” button is pressed, the lamp time resetting screen will be cancelled.
OPTION 2
LAMP POWER |
|
| HIGH | |||
LAMP SELECT |
|
| DUAL | |||
LAMP RUNTIME |
| 1 |
|
|
| 1820 H |
FUNCTION 1 |
|
| MUTE | |||
SET ID |
|
| ALL | |||
USER MODE |
|
|
|
|
|
|
SELECT | ADJ |
|
|
|
| ESC |
|
|
| ||||
|
|
| ||||
OPTION 2
LAMP POWER |
| HIGH | |||
LAMP SELECT |
| DUAL | |||
L1 RESET |
| [ POWER OFF ] | |||
FUNCTION 1 |
| MUTE | |||
SET ID |
| ALL | |||
USER MODE |
|
|
|
|
|
SELECT | ADJ |
|
|
| ESC |
|
| ||||
|
| ||||
13. Press the 
and 
buttons to select for replacement lamp setting.
L1 RESET: Replace the LAMP1
L2 RESET: Replace the LAMP2
L1+L2 RESET: Replace the LAMP1 & LAMP2
14. Press the POWER button to turn off the power.
This will reset the cumulative usage time for the lamp unit to zero.
44