OPTION 1 settings
1.Obtain the MENU window and select (highlight) the desired adjustment item with the
or 
buttons (on the projector or remote control).
2.Adjust the parameter value for the selected item with the 
or 
buttons.
|
| OPTION 1 |
|
|
|
|
|
|
|
| OSD |
| OFF | ON |
|
| |||
| RGB FORMAT |
| Y•PB•PR |
| |||||
| LENS SHIFT |
|
|
|
|
|
|
|
|
| BACK COLOUR |
| BLUE |
| |||||
| FRONT/REAR |
| FRONT |
| |||||
| DESK/CEILING |
| DESK |
| |||||
| SELECT | ADJ |
|
|
| ESC |
| ||
|
|
|
| ||||||
|
|
|
| ||||||
OSD (On-Screen Display)
ON: The name of the signal applied is displayed in the upper left corner of the screen whenever the input signal source is switched from one to another.
OFF: The signal name is not displayed even when an input source switching occurs.
RGB FORMAT
“RGB FORMAT” is used to select the video signal format depending on the signal applied to the RGB1 or RGB2 port: Only HDTV (1080i)
RGB FORMAT | RGB | |
|
|
|
|
|
|
Y•PB•PR
LENS SHIFT
“LENS SHIFT” is convenient for adjusting vertical picture position in situations where the projector is not easily accessible.
LENS SHIFT
button: Shifts the picture upward. button: Shifts the picture downward.
Note
•The screen picture move reverse direction when press the 
or 
button under the ceiling set up condition.
BACK COLOUR
“BACK COLOUR” is used to choose the background colour from blue or black when no signal is applied to the video input ports:
BACK COLOUR | BLUE | ||
|
|
|
|
|
|
|
|
BLACK
BLUE: Sets background colour to blue.
BLACK: Sets background colour to black.
Note
•If a signal with unknown or unidentifiable format is applied, it will be regarded as no signal and the screen be set to the selected background colour.
PROJECTION SCHEME 1
PROJECTION SCHEME 1 is used to choose the appropriate projection scheme from Front and Rear:
FRONT/REAR FRONT
REAR
FRONT: Choose this option if pictures are projected from the front of a reflective screen.
REAR: Choose this if pictures are projected from
the back of a translucent screen.
PROJECTION SCHEME 2
PROJECTION SCHEME 2 is used to choose the appropriate projection scheme from Floor and Ceiling:
DESK/CEILING DESK
CEILING
FLOOR: Choose this option if the projector is installed on a
CEILING: Choose if the projector is installed on the ceiling using the optional ceiling mount bracket.
34