Luce PT-L6510E manual Accessories, Do not look into the lens while the projector is being used

Page 7

Do not look into the lens while the projector is being used.

• Strong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damage your eyes.

Do not bring your hands or other objects close to the air outlet port.

• Heated air comes out of the air outlet port. Do not bring your hands or face, or objects which cannot withstand heat.

Replacement of the lamp unit should only be carried out by a qualified technician.

•The lamp unit has high internal pressure. It can easily become damaged if struck against hard objects or dropped, and injury or malfunctions may result.

Replacement of the lamp unit should only be carried out after it has completely cooled off, otherwise burns may result.

Disconnect the power cord plug from the wall outlet as a safety precaution before carrying out any cleaning.

• Electric shocks can result if this is not done.

Ask an Authorized Service Centre to clean inside the projector at least once a year.

•If dust is left to build up inside the projector without being cleaned out, it can result in fire or problems with operation.

•It is a good idea to clean the inside of the projector before the season for humid weather arrives. Ask your nearest Authorized Service Centre to clean the projector when required. Please discuss with the Authorized Service Centre regarding cleaning costs.

Do not reach for the openings beside the optical lens, during horizontal or vertical movements of the lens there is a injury hazard.

An effort to keep our environment clean, Please bring the non repairable unit your Dealer or a Recycling Company.

Accessories

Cheque that all of the accessories shown below have been included with your projector.

ENGLISH

Remote control unit [N2QAEA000003 x1]

Power cord for U. K.	USB cable	Lens cover
[TXFSX02VTHZ x1]	[3.0 m, K1HB04FD0002 x1]	[TKKL5103 x1]

Power cord for Continental	Wired cable for remote control	Battery for remote control unit
[TXFSX02VTFZ x1]	[15 m, K1EA03NA0001 x1]	[R03NPE/2ST x1]

Right-side exhaust guide	RGB signal cable (for VGA)	Conversion plug
[TPAKK21 x1]	[3.0 m,	[K2RB031D0001 x1]
	[3.0 m,	[K2RB031D0001 x1]
Left-side exhaust guide	K1HB15FA0001 x1]
[TPAKK22 x1]

Fixing pin

[TPAMM33 x1]

7

Image 7

Contents LCD Projector Commercial Use PT-L6600EDear Panasonic Customer Important Safety NoticeLMPORTANT the Moulded Plug U.K. only For Your SAFETY, Please Read the Following Text CarefullyContents Precautions with regard to safety Precautions with regard to safety Do not look into the lens while the projector is being used AccessoriesPower cord plug from the wall outlet Precautions on handlingSystem Example of System upLocation and function of each part Remote ControlProjector Top · Front and Side Projector Top · Rear and Side Rear control panel Location and function of each partInterface panel Loading batteries Using the Remote control unitEffective control range Laser Specifications Using laser pointerSetting projector IDs for remote control Press the ID SET button on remote controlUsing the remote control as a PC mouse Using the Remote control unitUsing the remote control in wired mode Projection Distances Setting-upInstallation Geometry Projection SchemesPin assignments on the RGB2 input port are as follows Setup precautionsExample of connecting with AV products Setting-upColour monitor with RGB video ports Example of connecting with PCsSystem switcher Example of connecting with system switcherStarting to use Powering Up the ProjectorMaking Initial Adjustment Setting input port Powering Off the ProjectorRetracting the Leveling Feet Adjusting the Vertical Position PictureStarting to use Leveling the ProjectorStill image Using the Freeze functionUsing the Shutter function Advice on the installation of exhaust guidesUsing the Digital Zoom D.ZOOM +/- function Menu screens On-screen menusBasic Menu Operations Menu Items SettingReset the Factory Default On-screen menusUsing the Index Window function PT-L6510E only Adjusting the picture Standard Signal ModeTV-SYSTEM BAL White balance R/G/BAdjusting the position Focus What Is S1 Video?Aspect ZoomBack Colour Option 1 settingsRGB Format Lens ShiftLamp Select Option 2 settingsLamp Power Setting Function 1 FuncSetting Unit ID Option 2 settingsRegistering/Deleting Displaying User Mode Using the Serial Connecting to a computer Using the SerialControl command Cable specificationsPin assignment and control Using the remote terminalExample of a control panel layout Indication of lamp monitor Indicator Display Condition Check MeasuresCleaning method Cleaning and replacing the air filterDisplay after 1800 hours Lamp replacement periodReplacing the lamp unit Model No Lamp unit model NoLamp unit replacement steps Replacing the lamp unit Press the Power button to turn off the powerNo image Symptoms ChequesPower does Not turn onSpecifications Remote RGB2 input Audio input For RGB 1/2Video RGB outputAppendix Compatible RGB SignalsTrademark acknowledgments DimensionsTrademark M1002-0