About Your Projector
Remote control
POWER button
While the MAIN POWER button is on, switch between
Display the main menu or return to the previous menu. (page 30)
Navigate through the menus with FGIH, and activate the menu item with ENTER.
(page 30)
Reset some of the settings to the factory default settings. (page 22)
Battery compartment
1.Press the tab and lift up the cover.
2.Insert the batteries according to the polarity diagram indicated inside.
Remote control signal emitter Remote control signal. (page 22)
Turn the button backlight of the remote control on/ off. (page 22)
Function buttons
Assign the frequently used functions from the options for shortcut. (page 39)
Learning remote control buttons and
LCD
Programme and operate other devices. See “Remote Control Operating Guide” which is provided with the projector.
Return to the previous menu. (page 30)
Capture the projected image as a still image. (page 22)
Preparation
Switch to cycle through |
| Display the LENS | Turn off the power |
the input method. |
| CONTROL menu and | automatically by setting |
(page 23) |
| adjust the focus and size | the duration. (page 25) |
|
| of the image. (page 25) |
|
|
|
|
|
Switch to cycle through |
| Switch to cycle through | Display the MEMORY |
the aspect ratio. |
| the PICTURE MODE. | LOAD menu. (page 23) |
| |||
(page 23) |
| (page 25) |
|
|
| ||
|
|
|
|
Display the input |
| Display the PICTURE | Display the COLOUR |
waveform. (page 24) |
| menu. (page 25) | MANAGEMENT menu. |
| |||
|
|
| (page 26) |
|
|
| |
|
|
|
|
NOTE:
•Do not drop the remote control.
•Avoid contact with liquids or moisture.
•Use manganese batteries or alkaline batteries with the remote control.
•Do not attempt to modify or disassemble the remote control. Contact an Authorised Service Centre for repairs.
•Do not keep pressing the remote control buttons as this may shorten battery life.
•Do not point the laser in other people’s eyes or stare into beam.
•See “Remote control operation” on page 22.