Technicolor - Thomson PT-AE2000E manual Lens shift and positioning, Adjusting the lens shift dials

Page 16

Setting up

Lens shift and positioning

If the projector is not positioned right in front of the centre of the screen, you can adjust the projected image position by moving the lens shift dials within the shift range of the lens.

Adjusting the lens shift dials

Horizontal shift

You can place the projector where the projector lens is up to 40% horizontally off-centre from the screen and then adjust the image position with the Lens shift dial • Horizontal.

Up to about 40 %	Up to about 40 %
of the projection	of the projection

Getting Started

Turn the dial clockwise:	Turning the dial counterclockwise:
Moving to screen’s right	Moving to screen’s left

Vertical shift

You can place the projector where the projector lens is up to 100% vertically off-centre from the screen and the adjust the image position with the Lens shift dial • Vertical.

Shifting the lever down:

Moving to screen’s bottom.

Up to about 100 % of the projection

Up to about 100 % of the projection

Shifting the lever up:

Moving to screen’s top.

16 - ENGLISH

Image 16

Contents Operating Instructions Important Safety Notice For business users in the European UnionThis Apparatus Must be Earthed To rain or moistureImportant Safety Notice Important the Moulded Plug U.K. onlyContents Contents Menu NavigationPicture menu Lens ControlPrecautions with regard to safety Do not look into the lens while the projector is being used Lamp cover gets very hot, and touching it can cause burnsPrecautions with regard to safety Projector may be subject to electromagnetic interference Accessories About Your Projector Remote controlLCD About Your Projector Projector bodyTop and front view About Your Projector Back and bottom view ComputerHdmi ComponentSetting up Calculation methods for screen dimensionsScreen size and throw distance Projected imageFront leg adjusters and throwing angle Setting upProjection method Mounting in the ceiling and projecting from frontAdjusting the lens shift dials Lens shift and positioningHorizontal shift Vertical shiftSetting up Projector location range When the screen position is fixedWhen the projector position is fixed 100% 40%Before connecting to the projector Connecting to Component IN/VIDEO IN/S-VIDEOConnecting to Computer IN/HDMI ConnectionsSwitching the projector on/off Power indicatorConnecting Disconnecting Projection mode. Recovery may take a whileSwitching off the projector Switching on the projectorSwitching the projector on/off Selecting the input signal Switch on the connected devicesAdjust the focus and the projected image size Projecting an imageRemote control operation Resetting to the factory default settingsOperating range Turning on the button backlightSwitching the input signal Switching the aspect ratioLoading a saved setting Remote control operationAdjusting the signal condition with a waveform Adjusting with luminance optionsDisplaying the waveform BrightnessAdjusting the focus and zoom Switching the picture modeAdjusting the image Switching off the projector automaticallySetting your own colour profile Adjusting the selected colourCreate a new profile Managing stored logsSaving a log setting as a profile Deleting the saved profilesChanging the profile names Loading saved profilesMenu Navigation DefaultMain menu and sub-menu Menu Navigation Adjusting with the bar scale items Navigating through the MenuDisplaying the main menu Returning to the previous menuPicture menu Colour Temperature Split AdjustDynamic Iris Waveform MonitorAdvanced Menu Adjusting the image in a split windowNR Noise Reduction Memory Load Memory SaveXvYCC Signal Mode Deleting a memory settingChanging the name of the memory setting You can edit the named memory settingsClock Phase Position menuPosition DOT ClockComponent signals Position menu Aspect ratio options and projection exampleZoom FITAuto Setup WSSOver Scan KeystoneZOOM/FOCUS BUTTON1/2/3Blank function Press Enter to display the projected imageOption menu Installation Lamp PowerSleep AltitudeTemp and Lamp Indicators Managing the indicated problemsLamp indicator Temp indicatorCare and Replacement Cleaning the projectorCare and Replacement When to replace the lamp unitReplacing the lamp unit Before replacing the lamp unitCare and Replacement Removing and replacing the lamp unit Resetting the Lamp RuntimeAttaching the top cover Lamp unit fixing screws Lamp unit lock Press hereTroubleshooting List of compatible signals Technical InformationSerial terminal Technical Information Communication settings Control commandsTechnical Information Inquiry commands Ceiling mount bracket safeguards Installing the safety cableSpecifications Video ComputerComponent HdmiDimensions Unit mmTrademark acknowledgements These Operating Instructions are printed on recycled paperIndex Index S0807-1087B