Technicolor - Thomson PT-AE2000E manual Zoom/Focus, BUTTON1/2/3, Blank function

LENS CONTROL

Remote control Control panel

See “Navigating through the MENU” on page 30. See “Main menu and sub-menu” on page 28.

FUNCTION BUTTON

Remote control Control panel

See “Navigating through the MENU” on page 30. See “Main menu and sub-menu” on page 28.

ZOOM/FOCUS

You can use the 2 different test patterns to adjust the focus and zoom of the image. See “Lens shift and positioning” on page 16.

1. Press ENTER to display test pattern 1.

Press F G to adjust the focus and I H to adjust the zoom.

RETURN	FOCUS
ENTER	ZOOM

2. Press ENTER to display test pattern 2.

Press F G to adjust the focus and I H to adjust the zoom.

RETURN	FOCUS
ENTER	ZOOM

3. Press ENTER to display the projected image.

You can confirm the adjustment is fit to the projected image.

4.Press MENU or RETURN to return to the previous menu, or press repeatedly to escape the menu mode.

NOTE:

•When the projector and/or the screen is tilted, adjust the focus at the centre of the image. The upper and lower edge might be out of focus.

•When the image is distorted in keystone, adjust the KEYSTONE in POSITION menu.

BUTTON1/2/3

You can assign certain menu options to the 3 function buttons for instant operation.

1.Select the required button from BUTTON1, BUTTON2 or BUTTON3 and press the ENTER button.

2.Press F G I H to select the required menu options and press the ENTER button.

HDMI 1 IN	NORMAL
HDMI 2 IN	DYNAMIC
HDMI 3 IN	COLOUR1
COMPUTER IN	COLOUR2
COMPONENT 1 IN	CINEMA1
COMPONENT 2 IN	CINEMA2
S-VIDEO IN	CINEMA3
VIDEO IN	SPLIT ADJUST
BLANK	WAVEFORM AUTO
	ADJUST
AUTO SETUP	MEMORY LOAD
CONTRAST	BRIGHTNESS
CONTRAST R	BRIGHTNESS R
CONTRAST G	BRIGHTNESS G
CONTRAST B	BRIGHTNESS B

BLANK function

You can stop the projection temporary for electrical power save. Press any button except the LIGHT and learning remote control buttons.

Settings

ENGLISH - 39