Technicolor - Thomson PT-AE2000E Remote control operation, Operating range, Capturing an image

Page 22

Basic Operation

Remote control operation

Operating range

You can operate the projector with the remote control within the remote range 7 m (22'11").

Facing to the projector

Ensure the remote control emitter is facing to the remote control signal receptor on front/back of the projector and press the required buttons to operate.

Facing to the screen

Ensure the remote control emitter is facing to the screen and press the required buttons to operate the projector. The signal will be reflected off the screen. The operating range may differ due to the screen material. This function may not be effective with a translucent screen.

NOTE:

• Do not let strong light shine onto the signal receptor. The remote control may malfunction under strong light such as fluorescent.

• If there are any obstacles between the remote control and the remote control signal receptor, the remote control may not operate correctly.

Turning on the button backlight

In a dark room, you can turn on the button	After 30 seconds without any operation, the backlight will
backlight to operate the remote control.	go out and press any but the LIGHT button to turn on
Press the LIGHT button on the upper right	again. To escape from the light-on mode, press the
corner of the unit to turn on the backlight and	LIGHT button.
enter the light-on mode.

Resetting to the factory default settings

You can reset most of the customised
settings to the factory defaults by pressing	NOTE:
DEFAULT button of the remote control.	• Some menu items are not available to reset by pressing
Display the required sub-menu or the menu	the DEFAULT button. Adjust each menu items
items and press the button again.	manually.

Capturing an image

When projecting an image, press FREEZE	You can adjust AREA SELECT of the SPLIT ADJUST
button to capture the projected image and	menu by pressing the ENTER button while the frozen
display it on the screen as a still picture. Press	image is displayed. See “SPLIT ADJUST” on page 32.
again to escape.

22 - ENGLISH

Image 22

Contents Operating Instructions This Apparatus Must be Earthed Important Safety NoticeFor business users in the European Union To rain or moistureImportant Safety Notice Important the Moulded Plug U.K. onlyContents Picture menu ContentsMenu Navigation Lens ControlPrecautions with regard to safety Do not look into the lens while the projector is being used Lamp cover gets very hot, and touching it can cause burnsPrecautions with regard to safety Projector may be subject to electromagnetic interference Accessories About Your Projector Remote controlLCD About Your Projector Projector bodyTop and front view Hdmi About Your Projector Back and bottom viewComputer ComponentScreen size and throw distance Setting upCalculation methods for screen dimensions Projected imageProjection method Front leg adjusters and throwing angleSetting up Mounting in the ceiling and projecting from frontHorizontal shift Adjusting the lens shift dialsLens shift and positioning Vertical shiftWhen the projector position is fixed Setting up Projector location rangeWhen the screen position is fixed 100% 40%Connecting to Computer IN/HDMI Before connecting to the projectorConnecting to Component IN/VIDEO IN/S-VIDEO ConnectionsConnecting Disconnecting Switching the projector on/offPower indicator Projection mode. Recovery may take a whileSwitching off the projector Switching on the projectorSwitching the projector on/off Adjust the focus and the projected image size Selecting the input signalSwitch on the connected devices Projecting an imageOperating range Remote control operationResetting to the factory default settings Turning on the button backlightLoading a saved setting Switching the input signalSwitching the aspect ratio Remote control operationDisplaying the waveform Adjusting the signal condition with a waveformAdjusting with luminance options BrightnessAdjusting the image Adjusting the focus and zoomSwitching the picture mode Switching off the projector automaticallyCreate a new profile Setting your own colour profileAdjusting the selected colour Managing stored logsChanging the profile names Saving a log setting as a profileDeleting the saved profiles Loading saved profilesMenu Navigation DefaultMain menu and sub-menu Menu Navigation Displaying the main menu Adjusting with the bar scale itemsNavigating through the Menu Returning to the previous menuPicture menu Dynamic Iris Colour TemperatureSplit Adjust Waveform MonitorAdvanced Menu Adjusting the image in a split windowNR Noise Reduction Memory Load Memory SaveXvYCC Changing the name of the memory setting Signal ModeDeleting a memory setting You can edit the named memory settingsPosition Clock PhasePosition menu DOT ClockZoom Component signalsPosition menu Aspect ratio options and projection example FITOver Scan Auto SetupWSS KeystoneBlank function ZOOM/FOCUSBUTTON1/2/3 Press Enter to display the projected imageOption menu Sleep InstallationLamp Power AltitudeLamp indicator Temp and Lamp IndicatorsManaging the indicated problems Temp indicatorCare and Replacement Cleaning the projectorReplacing the lamp unit Care and ReplacementWhen to replace the lamp unit Before replacing the lamp unitAttaching the top cover Care and Replacement Removing and replacing the lamp unitResetting the Lamp Runtime Lamp unit fixing screws Lamp unit lock Press hereTroubleshooting List of compatible signals Technical InformationSerial terminal Technical Information Communication settings Control commandsTechnical Information Inquiry commands Ceiling mount bracket safeguards Installing the safety cableSpecifications Component VideoComputer HdmiDimensions Unit mmTrademark acknowledgements These Operating Instructions are printed on recycled paperIndex Index S0807-1087B