Technicolor - Thomson PT-AE2000E manual Switching on the projector, Switching off the projector

Page 20

Basic Operation

Switching the projector on/off

Switching on the projector

POWER indicator	(1)

(3)

(2)

1.	Switch the MAIN POWER button on.	3. Press the POWER button.
	The power indicator lights up in red.	The power indicator lights up in green after flashing
2.	Remove the lens cover from the lens.	for a while.
		The STARTUP LOGO is displayed on the screen.
		See “STARTUP LOGO” on page 40.

NOTE:

•When starting up the projector, some small rattling or tinkling sound may be heard, or the display may flicker for the characteristics of the lamp. Those are normal and do not affect the performance of the projector.

•Do not attempt to modify the lens cover which may cause burns, fire or damage to the projector.

Switching off the projector

POWER indicator

(3)

(1)

		(2)
1. Press the POWER button.	2.	Press I to select OK and press the POWER or
The confirmation screen is displayed. It will		ENTER button.
disappear and return to the projection after		The power indicator lights up in orange while cooling
10 seconds without any operation.		the lamp, then illuminates red when it is ready to
To return to the projection, press any button except		switch off the MAIN POWER button.
the POWER button.	3.	Switch off the MAIN POWER button on the back of
		the projector.

NOTE:

• Press the POWER twice or for a long duration to switch the power off.

20 - ENGLISH

Image 20

Contents Operating Instructions Important Safety Notice For business users in the European UnionThis Apparatus Must be Earthed To rain or moistureImportant Safety Notice Important the Moulded Plug U.K. onlyContents Contents Menu NavigationPicture menu Lens ControlPrecautions with regard to safety Do not look into the lens while the projector is being used Lamp cover gets very hot, and touching it can cause burnsPrecautions with regard to safety Projector may be subject to electromagnetic interference Accessories LCD Remote controlAbout Your Projector Top and front view Projector bodyAbout Your Projector About Your Projector Back and bottom view ComputerHdmi ComponentSetting up Calculation methods for screen dimensionsScreen size and throw distance Projected imageFront leg adjusters and throwing angle Setting upProjection method Mounting in the ceiling and projecting from frontAdjusting the lens shift dials Lens shift and positioningHorizontal shift Vertical shiftSetting up Projector location range When the screen position is fixedWhen the projector position is fixed 100% 40%Before connecting to the projector Connecting to Component IN/VIDEO IN/S-VIDEOConnecting to Computer IN/HDMI ConnectionsSwitching the projector on/off Power indicatorConnecting Disconnecting Projection mode. Recovery may take a whileSwitching the projector on/off Switching on the projectorSwitching off the projector Selecting the input signal Switch on the connected devicesAdjust the focus and the projected image size Projecting an imageRemote control operation Resetting to the factory default settingsOperating range Turning on the button backlightSwitching the input signal Switching the aspect ratioLoading a saved setting Remote control operationAdjusting the signal condition with a waveform Adjusting with luminance optionsDisplaying the waveform BrightnessAdjusting the focus and zoom Switching the picture modeAdjusting the image Switching off the projector automaticallySetting your own colour profile Adjusting the selected colourCreate a new profile Managing stored logsSaving a log setting as a profile Deleting the saved profilesChanging the profile names Loading saved profilesMain menu and sub-menu DefaultMenu Navigation Menu Navigation Adjusting with the bar scale items Navigating through the MenuDisplaying the main menu Returning to the previous menuPicture menu Colour Temperature Split AdjustDynamic Iris Waveform MonitorNR Noise Reduction Adjusting the image in a split windowAdvanced Menu XvYCC Memory SaveMemory Load Signal Mode Deleting a memory settingChanging the name of the memory setting You can edit the named memory settingsClock Phase Position menuPosition DOT ClockComponent signals Position menu Aspect ratio options and projection exampleZoom FITAuto Setup WSSOver Scan KeystoneZOOM/FOCUS BUTTON1/2/3Blank function Press Enter to display the projected imageOption menu Installation Lamp PowerSleep AltitudeTemp and Lamp Indicators Managing the indicated problemsLamp indicator Temp indicatorCare and Replacement Cleaning the projectorCare and Replacement When to replace the lamp unitReplacing the lamp unit Before replacing the lamp unitCare and Replacement Removing and replacing the lamp unit Resetting the Lamp RuntimeAttaching the top cover Lamp unit fixing screws Lamp unit lock Press hereTroubleshooting List of compatible signals Technical InformationSerial terminal Technical Information Communication settings Control commandsTechnical Information Inquiry commands Ceiling mount bracket safeguards Installing the safety cableSpecifications Video ComputerComponent HdmiDimensions Unit mmTrademark acknowledgements These Operating Instructions are printed on recycled paperIndex Index S0807-1087B