PICTURE menu
COLOUR MANAGEMENT |
|
|
| |
| MEMORY SAVE | |||
You can manage your own defined colour settings. |
| |||
See “Setting your own colour profile” on page 26. You can save and name the adjusted PICTURE menu | ||||
xvYCC |
|
| settings for instant access from MEMORY LOAD menu. | |
| 1. | Adjust the items in PICTURE menu. | ||
You can switch on/off the automatic adjustment | 2. | Select MEMORY SAVE and press the ENTER | ||
system for signals which complied with xvYCC. |
|
| button. | |
ON: | Active | 3. | Select the required memory setting and press the | |
OFF: | Deactive |
|
| ENTER button. |
|
|
|
| The confirmation screen will be displayed. Select OK |
NOTE: |
|
|
| and press the ENTER button. |
• xvYCC adjustment system is only available with HDMI |
|
| Indicated with ★ is in use, and ✩ is empty. | |
signals in COLOUR1 of PICTURE MODE menu. | 4. | Use F G I H to specify the location of the | ||
|
|
|
| required character to enter and press the ENTER |
DETAIL CLARITY |
|
| ||
|
| button. | ||
You can switch on/off the automatic detail clarity system.
ON: Active
OFF: Deactive
CINEMA REALITY
You can switch the automatic image synchroniser on/off for 24 frames a second images, such as movies. Press I H to select the required setting.
ON: Active
OFF: Deactive
You can enter up to 16 characters.
MEMORY NAME INPUT
| ALL DELETE |
OK | CANCEL |
Settings
NOTE:
•CINEMA REALITY is effective only with interlace signals.
TV-SYSTEM
When the video signal is changed, the setting switches automatically.
You can switch the setting manually to match the video data. Press I H to cycle through the options.
AUTO |
|
|
|
|
| NTSC | ||||
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SECAM
NTSC 4.43
|
|
| PAL | |
|
|
| ||
|
|
|
|
|
NOTE:
•AUTO setting will select from NTSC/NTSC 4.43/PAL/
5.Repeat step 4 until you finish the text line.
Move the cursor to ALL DELETE and press the ENTER button to delete all the entered text line. Press the DEFAULT button to delete the last entered character or indicated with cursor in the text box.
To insert a character in the entered text line, move the cursor to the text box to select the required place and press G then perform step 4.
6.Select OK and press the ENTER button to set the entered text as a name.
NOTE:
•If you leave the text box empty and save, the default memory number will stay as a name.
MEMORY LOAD
You can access the saved settings instantly. See “Loading a saved setting” on page 23.
1.Select a setting from MEMORY1 - 16.
Undefined settings will not be selectable.
2.Press ENTER to activate.
NOTE:
•If you have not saved any settings, MEMORY1 - 16 will not be displayed.