Technicolor - Thomson PT-AE2000E Ceiling mount bracket safeguards, Installing the safety cable

Page 51

Technical Information

Ceiling mount bracket safeguards

The projector and the ceiling mount bracket are designed sufficiently safety though, make sure the safety cable provided with the projector is installed and attached to the bottom of the projector when mounting in the ceiling for safety and security.

NOTE:

•Even if it is guarantee period, the manufacturer is not responsible for any hazard or damage caused by using a ceiling mount bracket which is not purchased from an authorised distributors, or environmental conditions.

•Make sure to use a torque driver and do not use an electrical screwdriver or an impact screwdriver.

•Installation work of the ceiling mount bracket should only be carried by a qualified technician.

•Remove an unused ceiling mount bracket promptly.

Installing the safety cable

1.Install the ceiling mount bracket according to the Installation Instructions.

2.Loop the security cable around the ceiling mount bracket with less slack.

Lace the cable of the end with a latch through the loop on the other end of the cable.

3.Attach the latch on to the bottom of the projector with a provided screw. Torque: 1.25±0.2 N·m

* Indicated above is ET-PKE1000S.

Appendix

ENGLISH - 51

Image 51

Contents Operating Instructions To rain or moisture Important Safety NoticeFor business users in the European Union This Apparatus Must be EarthedImportant the Moulded Plug U.K. only Important Safety NoticeContents Lens Control ContentsMenu Navigation Picture menuPrecautions with regard to safety Lamp cover gets very hot, and touching it can cause burns Do not look into the lens while the projector is being usedPrecautions with regard to safety Projector may be subject to electromagnetic interference Accessories Remote control About Your ProjectorLCD Projector body About Your ProjectorTop and front view Component About Your Projector Back and bottom viewComputer HdmiProjected image Setting upCalculation methods for screen dimensions Screen size and throw distanceMounting in the ceiling and projecting from front Front leg adjusters and throwing angleSetting up Projection methodVertical shift Adjusting the lens shift dialsLens shift and positioning Horizontal shift100% 40% Setting up Projector location rangeWhen the screen position is fixed When the projector position is fixedConnections Before connecting to the projectorConnecting to Component IN/VIDEO IN/S-VIDEO Connecting to Computer IN/HDMIProjection mode. Recovery may take a while Switching the projector on/offPower indicator Connecting DisconnectingSwitching on the projector Switching off the projectorSwitching the projector on/off Projecting an image Selecting the input signalSwitch on the connected devices Adjust the focus and the projected image sizeTurning on the button backlight Remote control operationResetting to the factory default settings Operating rangeRemote control operation Switching the input signalSwitching the aspect ratio Loading a saved settingBrightness Adjusting the signal condition with a waveformAdjusting with luminance options Displaying the waveformSwitching off the projector automatically Adjusting the focus and zoomSwitching the picture mode Adjusting the imageManaging stored logs Setting your own colour profileAdjusting the selected colour Create a new profileLoading saved profiles Saving a log setting as a profileDeleting the saved profiles Changing the profile namesDefault Menu NavigationMain menu and sub-menu Menu Navigation Returning to the previous menu Adjusting with the bar scale itemsNavigating through the Menu Displaying the main menuPicture menu Waveform Monitor Colour TemperatureSplit Adjust Dynamic IrisAdjusting the image in a split window Advanced MenuNR Noise Reduction Memory Save Memory LoadXvYCC You can edit the named memory settings Signal ModeDeleting a memory setting Changing the name of the memory settingDOT Clock Clock PhasePosition menu PositionFIT Component signalsPosition menu Aspect ratio options and projection example ZoomKeystone Auto SetupWSS Over ScanPress Enter to display the projected image ZOOM/FOCUSBUTTON1/2/3 Blank functionOption menu Altitude InstallationLamp Power SleepTemp indicator Temp and Lamp IndicatorsManaging the indicated problems Lamp indicatorCleaning the projector Care and ReplacementBefore replacing the lamp unit Care and ReplacementWhen to replace the lamp unit Replacing the lamp unitLamp unit fixing screws Lamp unit lock Press here Care and Replacement Removing and replacing the lamp unitResetting the Lamp Runtime Attaching the top coverTroubleshooting Technical Information List of compatible signalsSerial terminal Control commands Technical Information Communication settingsTechnical Information Inquiry commands Installing the safety cable Ceiling mount bracket safeguardsSpecifications Hdmi VideoComputer ComponentUnit mm DimensionsThese Operating Instructions are printed on recycled paper Trademark acknowledgementsIndex Index S0807-1087B