
Switching the projector on/off
Mains lead
| Connecting |
| Disconnecting |
1. | Make sure the shape of | 1. | Make sure the MAIN POWER is switched off and |
| the mains plug and the |
| unplug the mains lead from the mains socket. |
| AC IN connector on the | 2. | Hold the plug and unplug the mains lead from the |
| back of the projector |
| AC IN connector on the side of the projector. |
| match, then push the plug all the way in. |
|
|
2. | Connect the mains lead to a mains socket. |
|
|
NOTE:
•Do not use other than the provided mains lead.
•Ensure all the input devices are connected and turned off before connecting the mains lead.
•Do not force the connector as this may damage the projector and/or the mains lead.
•Dirt or dust
•Switch off the power to the projector when not in use.
POWER indicator
POWER indicator
Indicator status | Status | ||
|
|
| |
No illumination or flashing | The MAIN POWER button is switched off. | ||
|
|
| |
Red | Lit | The MAIN POWER button is switched on and the projector is in standby. | |
|
|
| |
Green | Flashing | The POWER button is switched on and the projector is getting ready to project. | |
|
| ||
Lit | The projector is ready to project. | ||
| |||
|
|
| |
| Lit | The POWER button is switched off and the projector is cooling the lamp. | |
Orange |
|
| |
Flashing | The POWER button is switched on again when cooling the lamp and recovering to | ||
| |||
| projection mode. Recovery may take a while. | ||
|
| ||
|
|
|
NOTE:
•While the projector is cooling the lamp, do not switch the MAIN POWER button off or unplug the mains lead.
•The electric consumption in standby mode is 0.08 W.
Basic Operation