TANDBERG user manual Basics, Getting started Vision 5000 Videoconferencing System

Getting started VISION 5000 Videoconferencing System

Basics

The Vision 5000’s most commonly used functions are accessible directly from the remote control by single key presses. In addition, the user interface is represented by on-screen boxes which take the form of menus and lists. Individual items within the menus and lists can be selected by moving a white highlighter bar to the desired option. Use the cursor keys (shown below) to move the highlighter bar to the desired option and use the OK key to select.

1	2	3	SEND
4	5	6	ACCEPT
			END CALL
7	8	9	DELETE
*	0	#	DIRECTORY
HELP	VOLUME		SELFVIEW
P1	P2	P3	P4
MENU		UP
STORE	LEFT	OK	RIGHT

MIC OFF	DOWN
VIDEO
SOURCE
FOCUS	ZOOM
FAR END AUTO	PIP	GRAPHICS
CAMERA FOCUS	MOVE	FREEZE

UP

LEFT OK RIGHT

To confirm the selection press OK .

DOWN

All functions are accessible using the keys on the remote control, these keys can be divided into three functional groups (see figure).

To make a call you only need to use the Dialling keys. The twelve number keys, (0-9), #, * operate in the same way as on a modern push-button telephone.

The Control keys are probably the most frequently used keys during a call, allowing you to switch between pre-stored camera positions, control the volume, select self-view and obtain help.

The Hidden Control keys are protected by a sliding panel and facilitate a more advanced use of your Vision 5000. With these keys you may enter the menu system to change parameters, control the camera, set new pre-stored positions and so forth.

24