Ethernet | VISION 5000 Videoconferencing System |
Ethernet Functionality
The system supports TCP/IP connectivity over Ethernet. The following functionalities are supported:
•Control of the system via a standard
•Dataport access using Telnet (described in the document ‘Dataport User Guide’)*.
•Software Upgrade using
•SNMP (Simple Network Management Protocol)
WWW-interface
It is possible to access the system remotely via a local area network (LAN) using a standard WWW- browser.
What is needed
• PC with a WWW-browser.
• Ethernet cable (RJ-45).
• LAN-network port.
NOTE: You should not connect the PC directly to the codec. The connection should always go through a local area network.
LAN port
LAN port
Local Area Network - LAN
* - Please contact your dealer for further information.
76