Sharp PG-F255W quick start Other connected equipment, Using the projector in other countries

Caution regarding usage of the projector

■If you are not to use the projector for a long time or before moving the projector, make certain you unplug the power cord from the wall outlet, and disconnect any other cables connected to it.

■If the power cord is unplugged while the cooling fan is running, some parts of the projector may still be hot. Use caution when handling the projector.

■Do not carry the projector by holding the lens.

■When storing the projector, ensure you at- tach the lens cap to the projector. (See page 12.)

■Do not expose the projector to direct sunlight or place next to heat sources. Doing so may affect the cabinet color or cause deformation of the plastic cover.

Other connected equipment

■When connecting a computer or other audio- visual equipment to the projector, make the connections AFTER unplugging the power cord of the projector from the AC outlet and turning off the equipment to be connected.

■Please read the operation manuals of the pro- jector and the equipment to be connected for instructions on how to make the connections.

Using the projector in other countries

■The power supply voltage and the shape of the plug may vary depending on the region or country you are using the projector in. When using the projector overseas, make sure you use an appropriate power cord for the country you are in.

Temperature monitor function

■If the projector starts to overheat due to setup

problems or blockage of the air vents, Ò Ó and

Ò Ó will illuminate in the lower left corner of the picture. If the temperature continues to rise, the lamp will turn off, the temperature warn- ing indicator on the projector will blink, and after a 60-second cooling-off period the projector will enter standby mode. Refer to ÒMaintenance In- dicatorsÓ on page 53 for details.

Info

•The cooling fan regulates the internal tempera- ture, and its performance is automatically con- trolled. The sound of the fan may change during projector operation due to changes in the fan speed. This does not indicate malfunction.

Introduction

9