Sharp PG-F255W 2Adjusting the Image, 3Adjusting the Color Temperature, 4Adjusting the Colors

Page 46

Picture Adjustment (“Picture” Menu) (Continued)

Menu operation n Page 39

2Adjusting the Image

Adjustment

O button

Q button

items

 

 

Contrast

For less

For more

 

contrast.

contrast.

Bright

For less

For more

 

brightness.

brightness.

Color*1

For less color

For more color

 

intensity.

intensity.

Tint*1

For making skin

For making skin

 

tones purplish.

tones greenish.

Sharp*1

For less

For more

 

sharpness.

sharpness.

Red*2

For weaker red.

For stronger red.

Blue*2

For weaker blue.

For stronger blue.

BrilliantColor™*2 *3

For making the

For making the

 

effect weaker.

effect stronger.

 

 

 

*1 Not displayed in the RGB input mode.

*2 Not adjustable/selectable when selecting “sRGB”.

*3 BrilliantColor™ uses Texas Instruments’ BrilliantColor™ technology. As the BrilliantColor™ level is increased, the image becomes brighter while the color reproduction is kept at a high level.

Note

•“Red”, “Blue”, “BrilliantColorTM” and “CLR Temp” cannot be set when “sRGB” is selected.

•To reset all adjustment items, select “Reset” and press ENTER.

3Adjusting the Color Temperature

Selectable

 

Description

items

 

 

 

 

 

 

–1

For lower color temperature for

warmer, reddish incandescent-like

0

images.

P

 

R

 

 

1

For higher color temperature for

cooler, bluish, fluorescent-like images.

 

 

 

 

Note

•Values on “CLR Temp” are only for general standard purposes.

4Adjusting the Colors

This function adjusts each of the six main colors that comprise the color wheel, altering their ÒHueÓ, ÒSaturationÓ, or ÒValueÓ.

Selectable items

Description

C.M.S.-Hue

Sets the hue of the main colors.

C.M.S.-Saturation

Sets the saturation of the main

 

colors

C.M.S.-Value

Sets the brightness of the main

 

colors.

Reset

The adjustments of “Hue”,

 

“Saturation” and “Value” of all

 

colors are reset to the default

 

setting.

Adjusting ÒHueÓ, ÒSaturationÓ, or ÒValueÓ.

1Select “On” for “C.M.S. Setting” in the “Picture” menu and then press ENTER.

2Select “C.M.S.” in the “Picture” menu and then press ENTER.

3Press P or R to select either “Hue”, “Saturation”, or “Value” and then press ENTER.

4Select the color to be adjusted with P or R and adjust it with O or Q.

Example of adjusting the ÒHueÓ

Main colors

O button

Q button

R (Red)

Closer to magenta

Closer to yellow

Y (Yellow)

Closer to red

Closer to green

G (Green)

Closer to yellow

Closer to cyan

C (Cyan)

Closer to green

Closer to blue

B (Blue)

Closer to cyan

Closer to magenta

M (Magenta)

Closer to blue

Closer to red

•When ÒSaturationÓ is selected, the selected

color becomes

O: lighter. Q: thicker.

•When ÒValueÓ is selected, the selected color

becomes

O: darker. Q: brighter.

•To reset the adjustment values of each color to the default settings, select ÒResetÓ and press

ENTER.

42

Page 45 Page 47
Image 46
Page 45 Page 47
Contents PG-F255W Model No Serial No This Apparatus Must be Earthed If YOU have ANY DOUBT, Consult a Qualified ElectricianPage IntroductionENGLISH A. onlyInformation OnlyMaintenance Troubleshooting Index For Future ReferenceContents Reference Power Sources CleaningAccessories Power-Cord ProtectionSafety Check Damage Requiring ServiceReplacement Parts OverloadingDo not block the exhaust and intake vents Avoid locations with extremes of temperatureRest your eyes occasionally See ÒRegarding the LampÓ onIf the projector starts to overheat due to setup Using the projector in other countriesTemperature monitor function Other connected equipmentSetup Manual For WindowsAccessories Optional accessoriesPart Names and Functions ProjectorAudio 1 input terminal Rear ViewComputer CLICK/EFFECT COMPUTER, DVIUP/PAGE ButtonPull down the tab on the cover and remove the cover Inserting the BatteriesUsable Range Towards the direction of the arrowQuick Start Setup and ProjectionHeight Upper side ControlStandard Setup Front Projection Setting up the ProjectorSetting up the Projector Ceiling-mount SetupProjection Projection PRJ ModeExample 1610 Signal Input Normal Mode Picture Size DistanceSignal Input Normal Mode Screen Size and Projection DistanceConnecting the Projector to Other Equipment You may need other cables or connectors not listed belowConnecting the Projector to Other Equipment Audio OUT Controlling the Projector by a Computer When connecting to the LAN terminal using a LAN cable Connecting the Power CordAC socket To AC outlet Power cord supplied Turning the Projector On/Off Turning the Projector onAdjusting the Picture Size About the Setup GuideAdjusting the Projected Image Adjusting the Focus Image ProjectionHeight Adjust lever Adjusting the HeightUse the rear adjustment foot to make the projector level Make small adjustments Rear adjustment footPress P/Q or O/R to adjust Keystone Correction Press Keystone to enter the Keystone Correction modeCorrecting Trapezoidal Distortion COMPUTER, DVI VIDEO, Video Switching the Input ModeAdjusting the Volume Buttons AV Mute buttonPress Resize Resize ModeResize About Copyrights Using the Spot Function Operating with the Remote ControlDisplaying and Setting the Break Timer Switching the Eco+Quiet ModeFreezing a Moving Image Auto Sync Auto Sync AdjustmentSelecting the Picture Mode Displaying an Enlarged Portion of an ImageWhen left-clicking Using the Remote Control as the Wireless Computer MouseWhen moving the cursor When right-clickingMenu Items Following shows the items that can be set in the projectorScreen adjustment SCR-ADJ menu Items you can set with the Help menu Help menu nPress Qor Oand select Picture to adjust Using the Menu ScreenMenu Selections Adjustments Example Adjusting ÒBrightÓTo adjust the projected Image while watching itMenu operation n Picture Adjustment Picture Menu1Selecting the Picture Mode PAGE1 PAGE24Adjusting the Colors 2Adjusting the Image3Adjusting the Color Temperature Adjusting ÒHueÓ, ÒSaturationÓ, or ÒValueÓProgressive Lamp SettingReducing Image Noise DNR Adjusting the Image Position Keystone Correction Adjusting the Projected Image SCR ADJ MenuSetting the Resize Mode Setting the On-screen DisplayReversing/Inverting Projected Images 6Selecting the Setup Guide5Selecting the Background Image 8Selecting the On-screen Display Language4STANDBY Mode 1Auto Sync Auto Sync Adjustment2Auto Power Off Function 5Setting the Confirmation Sound System SoundSystem Lock Function Fan Mode SettingAudio Input This function changes the fan rotation speedConfirm Checking the Lamp Life StatusEnter the same keycode in Re Locking the Operation Buttons1Setting a Password Enter IP Address using P, R, Q O, then press Enter 2DHCP Client Setting3TCP/IP Setting 4Confirming the Projector InformationEnter button Adjustment buttons P/R/O/Q MENU/HELP button Troubleshooting with the Help MenuUtilizing the Help Menu Functions Maintenance Cleaning the projectorMaintenance Indicators Temperature warning indicator Lamp indicator Power indicatorPlease exercise care when Lamp Regarding the LampReplacing the Lamp Disconnect the power cord Removing and Installing the Lamp UnitRemove the lamp unit cover Resetting the Lamp Timer How to Use the Storage Case Storing the ProjectorComputer Compatibility Chart ComputerTroubleshooting 21-2552, 53 For Sharp Assistance Specifications Dimensions Index
Top Page Image Contents