Sharp PG-F255W quick start Troubleshooting with the Help Menu, Utilizing the Help Menu Functions

Troubleshooting with the “Help” Menu

This function advises you to solve the problems during usage.

Utilizing the “Help” Menu Functions

Example: When image flickering appears

Operation to solve image flickering when pro- jecting the computer RGB signal.

1 Press MENU/HELP.

2 Press Oor Qto select “Help”, then press ENTER.

3 Press P or R to select “Vertical stripes or flickering image ap- pears” on Help menu, then press

ENTER.

Pict.	SCR	PRJ	Net.	Help
Vertical stripes or flickering image appear
There is no picture or audio
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
Picture is dark
The image is distorted
Reset all adjustments to default settings
SEL.			ENTER	END
			Press ENTER.

Help

Vertical stripes or flickering image appear

Initiate “Auto Sync” Adjustments.

If there is no change after performing "Auto Sync" adjustments, adjust the following items.

Adjust vertical noise

Adjust horizontal noise

Reset the 2 items above Return

Signal Info 1024 768
H	48.3 kHz / V 59.9 Hz
SEL.	ENTER	END

ENTER button

Adjustment buttons (P/R/O/Q)

MENU/HELP button

4 Select “Initiate “Auto Sync” Ad- justments”, then press ENTER.

5 If the image is not improved, se- lect “Adjust horizontal noise”, then press ENTER.

6 Press O or Q to adjust.

			Help
Phase	0
SEL./ADJ.	Rtn. Menu	END

Note

•You can adjust the items with check marks (✔).

•The items in the “Help” menu change, de- pending on the input signal or setting that you have selected.

•If the problem is not solved, refer to “Troubleshooting” (see pages 60 and 61).

•When selecting “sRGB” in “Picture Mode”, the item “Color is faded or poor” is not displayed. This means you cannot change input signal types.

Features Useful

51