Sharp PG-F255W Adjusting the Height, Use the rear adjustment foot to make the projector level

Image Projection (Continued)

3 Adjusting the Height

The height of the projector can be ad- justed using the adjustment feet at the front and rear of the projector.

When the screen is above the projec- tor, the projection image can be made higher by adjusting the projector.

1 Lift the projector to adjust its height while lifting the HEIGHT ADJUST lever.

2 Remove your hands from the HEIGHT ADJUST lever of the pro- jector after its height has been finely adjusted.

• The angle of projection is adjustable up to 9 degrees from the surface on which the projector is placed.

HEIGHT ADJUST lever

3 Use the rear adjustment foot to make the projector level.

• The projector is adjustable ±2 degrees from the standard position.

Note

• When adjusting the height of the projector, trapezoidal distortion occurs. Follow the pro- cedures in Keystone Correction to correct the distortion. (See pages 29 and 44.)

Make small adjustments.

Rear adjustment foot

Info

•Do not apply too much pressure on the pro- jector when the front adjustment foot comes out.

•When lowering the projector, be careful not to get your fingers caught in the area between the adjustment foot and the projector.

•Hold the projector firmly while lifting or carrying.

•Do not hold by the lens area.

28