Sharp FODC550 Originals that cannot be used in the Rspf, Stream feeding mode, Paper holder arm

MAKING COPIES

Originals that cannot be used in the RSPF

The following originals cannot be used. These may cause misfeeds or smudging and unclear images.

•Transparencies, tracing paper, other transparent or translucent paper, and photographs

•Carbon paper, thermal paper

•Originals that are creased, folded, or torn

•Glued originals, cut-out originals

•Originals with binder holes

•Originals printed using an ink ribbon (thermal transfer printing), originals on thermal transfer paper

Stream feeding mode

"SET ORIGINALS FOR STREAM FEEDING" will appear in the display for five seconds after all originals are fed. If a new original is placed in the RSPF during this time, the original will be automatically fed in and copying will begin with the same setting. Stream feeding mode can be disabled in "STREAM FEEDING" in the user programs (p.63).

Capacity of paper output tray

Maximum number of pages that can be held in the tray: 200

Paper output tray extension

When copying onto paper larger than 8-1/2" x 11" size, pull out the paper output tray extension.

Paper holder arm

The paper output tray has a paper holder arm. The paper holder arm presses gently on the output paper to stack it (p.9).

Note	• The paper output tray can hold a maximum of 200 pages. If more
	than 200 pages are allowed to accumulate, a paper jam may occur.

•After removing paper, if you need to return the paper to the paper output tray, lift up the paper holder arm and place the paper under the arm.

22