Sharp FODC550 operation manual Then set the paper size, Memory FULL, Press Start to

TROUBLESHOOTING AND MAINTENANCE

Problem	Cause and solution	Page
	Copying or printing is performed.
	→ Set the paper size after copying or	-
	printing is complete.
Paper size for a paper
	The machine has stopped temporarily
tray cannot be set.	due to running out of paper or a	15, 19,
	misfeed.
		79
	→ Load paper or remove the misfeed, and
	then set the paper size.
	"MEMORY FULL, PRESS START TO
	RESUME." appears in the display.
	→ The memory became full during sort
A copy job stops before	copy. Copy only the originals that have	30
	been scanned to that point, or cancel
it is finished.	the job and clear the data from
	memory.
	The tray is out of paper.	15
	→ Load paper.
	Other indicators are lit.
	→ If other indicators are lit, the machine is
	in preheat mode. Press any key on the	13
	operation panel to resume normal
The power save	operation.
indicator is lit.	Only the power save indicator is lit.
	→ If only the power save indicator is lit, the
	machine is in auto power shut-off	13
	mode. Press the [START] key ( ) to
	resume normal operation.
Error indicator ( ) is	See "DISPLAY MESSAGES" to check
	the meaning of the error indicator and	69
lit or blinking.	error message in the display, and take
	appropriate action.
	The same power outlet is used for the
	lighting fixture and the machine.
Lighting fixture flickers.	→ Connect the machine to a power outlet	-
	which is not used for other electric
	appliances.

74