Sharp FODC550 Install a TD, Replace, Drum, TD Cartridge, Is Near Empty, Cartridge will, Be Needed

TROUBLESHOOTING AND MAINTENANCE

	Indication		Cause and remedy	Page
Lamp indicator		Display
		INSTALL A TD	The TD cartridge is not installed	84
		CARTRIDGE.	correctly. Reinstall the TD cartridge.
	Blinks
		REPLACE THE	The drum cartridge has reached the
		DRUM	end of its life. Replace it with a new	87
Error		CARTRIDGE.	drum cartridge.
		TD CARTRIDGE	Toner is low. Purchase a new TD
indicator				91
		IS NEAR EMPTY.	cartridge.
	Steadily
		A DRUM	Less than 1000 sheets can be printed
	lit	CARTRIDGE WILL
			with the current drum cartridge.	91
		BE NEEDED	Purchase a new drum cartridge.
		SOON.
MEMORY	FULL,	PRESS START TO	Data is being held in memory. Print the	30
RESUME.			data or clear it from memory.
NO 2-SIDED COPY FROM BYPASS			Two sided printing or 2 IN 1 copying is
TRAY.			selected when the bypass tray is
			already selected, or the bypass tray is	26
			selected when two-sided printing or 2
NO 2IN1 COPY FROM			IN 1 copying is already selected.	31
BYPASS TRAY.			The bypass tray cannot be used. Press
			the [TRAY SELECT] key ( ) to select
			a paper tray.
NO 2IN1 COPY WITH MARGIN			2 IN 1 copy and margin shift cannot be	31
			used in combination. Cancel the
SHIFT.				34
			function that was selected last.
COPY RATIO CAN NOT BE			Copy ratio can not be changed in 2 IN 1	25
CHANGED IN 2IN1.			copy.	31
THIS MENU IS NOT SELECTABLE			This appears if you attempt to change
			a user program setting while a print job	62
WITH DATA.
			is in progress.
			There is no paper for printing. Press
			the [MODE SELECT] key to switch to
NO XXXX SIZE TRAY			printer mode and follow the instructions	-
			in the display.
			("XXXX" indicates paper size)
			An original remains on the document
			glass, or the original is too thick to	21
			scan. Remove the original.
CHECK SPF/RSPF.			If the message is not cleared when
			there is no original on the document
START TO RESUME.
			glass, the underside of the RSPF is	89
			dirty. Clean the underside of the RSPF
			(especially areas where black lines
			appear).
			Printing is not possible if the paper size
			setting is different from the size of
			paper loaded in the tray. Load the
LOAD XXXX PAPER INTO TRAY<*>.			same size of paper as the paper size	15
			setting and then press the [START] key
			( ). Printing will begin.
			("XXXX" indicates paper size. The tray
			is indicated in <*>.)
NO PC COMMUNICATION; CHECK			The machine is not correctly connected
			to the computer. Check the cable	55
CABLE.
			(when using the scanner function).

70