Sharp FODC550 operation manual About Supplies, TD cartridge and drum cartridge, Supply list

Page 93

TROUBLESHOOTING AND MAINTENANCE

TD cartridge and drum cartridge

1

2

Remove the TD cartridge and drum cartridge as explained in "TD CARTRIDGE REPLACEMENT" (p.84) and "DRUM CARTRIDGE REPLACEMENT" (p.87).

Wipe the parts of the TD cartridge and drum cartridge shown below with a clean cloth.

Wipe only the parts that are indicated in the illustration.

Note

• Do not touch the surface of the drum (green portion).

Doing so may cause smudges on the copies.

When cleaning the TD cartridge, do not tilt or shake it. Toner may spill out and soil your clothes.

3 Replace the TD cartridge and drum cartridge as explained in "TD CARTRIDGE REPLACEMENT" (p.84) and "DRUM CARTRIDGE REPLACEMENT" (p.87).

ABOUT SUPPLIES

When ordering supplies, please use the correct part numbers as listed below.

Note

Supply list

Be sure to use only genuine SHARP parts and supplies.

For best copying results, be sure to use only SHARP Genuine Supplies which are designed, engineered, and tested to maximize the life and performance of SHARP copiers. Look for the Genuine Supplies label on the toner package.

8

Supply

Part number

Usable life

 

 

 

TD cartridge

FO-55ND

Approx. 6,000 sheets

 

 

 

Drum cartridge

FO-55DR

Approx. 18,000 sheets

 

 

 

*Based on copying onto letter size paper at 5% toned area

(The starter TD cartridge included with the machine has a life of approximate 2,000 sheets at 5% toned area.)

91

Image 93
Contents FO-DC550 Checks Passports Drivers licenses For Your RecordsContents User Programs Selecting a Setting for a User Program Specifications Software License Material Safety Data SheetIndex Important points when selecting an installation site Do not install your machine in areas that are10cm 20cm Supply and Consumables Trademark acknowledgementsSafety precautions Environmental InformationUSB 2.0 compatible Online Manual on the accessory CD-ROM Using the manualIntroduction Conventions used in this manual and online manualMain Features Color scanner function Fax function Laser printer functionNetwork connection option Environment and people friendly designPart Names PreparationsOperation panel Copy Ratio key Press to select an enlargement or reduction ratioClear ALL key Power on Power on and OFFTurn the power switch to the on position Language settingPower save modes Power offPreheat mode Auto power shut-off modePaper type Size Weight Capacity Loading PaperPaper Loading the Paper Tray Follow these guidelines when using special papersSpecial papers Or curled edgesPaper size, change the paper size setting as explained Changing a Trays Paper Size Setting p.19Gently push the paper tray back into the machine Important points when inserting paper in the bypass tray Bypass Feed including special paperEnvelopes Loading paper in the bypass tray Open the bypass tray and extend the trayPress the Tray Select key to select the bypass tray Follow these steps to change a trays paper size setting Changing a Trays Paper Size SettingSelect the tray, and then press Press the Menu keyMaking Copies Using the document glassNormal Copying Copying books or originals with folds or creasesDefault output mode will be non-sort mode. p.65 Using the RspfDocument feeder tray Placed at onceOriginals that cannot be used in the Rspf Stream feeding modeCapacity of paper output tray Paper output tray extensionSelecting the Tray Setting the number of copiesPress the Tray Select key Press the numeric keys to set the number of copiesMaking a Copy Darker or Lighter Fine adjustment of the ratio Selecting a preset ratioUse the key or the key for fine adjustment REDUCTION/ENLARGEMENT/ZOOMConvenient Copy Functions Automatic TWO-SIDED CopyingRspf Clear key . When the Clear key is pressed, Number of copies setting is also clearedIf you need to clear the data scanned into memory, press Place the originals in the RSPF. p.21 Press the Enter keyPress the Enter key Sort appears and then press Sort CopyCopies of multiple original pages can be sorted into sets Sort copyPlace the originals. p.21 If the memory becomes fullOffset function during sort copy 1 copy Copying Multiple Originals Onto a Single Sheet of PaperSetting is also cleared 2IN1 appears and then press Place the originals. p.21 Press the E-SORT/SP.FUN key untilMargin shift Creating Margins When CopyingPlace the originals Press the E-SORT/SP.FUN key until Rspf ABTo cancel margin shift mode, press the Clear ALL key Software for FO-DC550 SET UP the SoftwareMFP driver SharpdeskInstallation environment and usable software Before InstallationHardware and software requirements MFP Driver Button Cable Operating systemStandard Installation USB only Installing the SoftwareDouble-click the setup icon Then install it using the new connection methodWhen the Finish screen appears, click the Close button SET UP the SoftwareThis completes the installation of the software Install the USB 2.0 Composite DeviceWindows XP USB/Parallel Welcome window will appear. Click the Next button SET UP the Software Connect the USB/parallel cable p.55 Windows 98/Me/2000 USB SET UP the Software Windows 95/98/Me/NT 4.0/2000 Parallel Select LPT1 for the printer port Using the machine as a shared printer Perform steps 2 through 7 in Custom Installation p.40 p.41Is connected to the same network Click the MFP Driver button Printer port selection window, verify the network printer That you are using and click the Next buttonThat is shared and whether the machine is to be used as You will return to the window of . Click the Close buttonWindows XP Setting UP Button ManagerSET UP the Software Windows 98/Me/2000 Select Sharp FO-DC550 and click the Properties buttonClick view all Control Panel options Select Sharp Button Manager F in Send to this application Connecting a USB cable Connecting the Machine to Your ComputerConnecting a parallel cable System requirements for USB 2.0 Hi-Speed mode Following system is required to use USB 2.0 Hi-Speed modeUser programs p.66 Basic Procedure for Printing Using the Printer ModeCanceling a print job Make sure that paper is loaded in the trayUsing the Scanner Mode Scanning Using the Keys on the MachineScanning from the operation panel of the machine Operation in COPY, PRINTER, and Scanner Modes Scanning from Your ComputerButton Manager scan menu Modes Copying Printing ScanningInstalling Acrobat Reader HOW to USE the Online ManualFollow the on-screen instructions to install Acrobat Reader Click to read the online manualUser Settings Copy modeUser Programs Pattern MIN300dpi OFFHI-SPEED 50%LOW NormalAmerican EnglishFULL-SPEED Print modeSelecting a Setting for a User Program Appears. Adjust the exposure and press the Enter keyPress the Menu key and then press the Enter key Key entry beep One beep Base setting beep Base settingsInvalid key beep AUTO/TEXT/PHOTO AutoTroubleshooting and Maintenance Indication Cause and remedy Lamp indicator DisplayDisplay Messages Replace Install a TDDrum TD CartridgeSelect the correct original type for Original Troubleshooting the MachineCopies are too dark or Too lightTroubleshooting and Maintenance Paper is outside of the specified Size and weight range Problem Cause and solution Misfeed occurPaper is not loaded properly Paper misfeedMemory FULL, Press Start to Then set the paper sizeMFP driver cannot be installed Windows 2000/XP Problems During Setup of the SoftwareClick Performance and Maintenance, and then click System Click the start button and then click Control PanelPlug and play screen does not appear USB only Click the icon beside Universal Serial Bus controllersDevice Manager tab Manager button Click System, click the Hardware tab, and click the DeviceClick Icon beside Other Devices Click the Ports tabRemoving the software Setting of the other printer back to LPT1Click Add or Remove Programs If you need to remove the software, follow these stepsMisfeed in the paper feed area p.80 Misfeed RemovalMisfeed in the paper feed area Misfeed in the fusing areaMisfeed in the transport area Document feeder cover Misfeed in the RspfLockUnlock Scan Head Locking SwitchTD Cartridge Replacement Out while pressing the lock Release button Gently pull the TD cartridgeWhile pushing the lock release button Gently insert the TD cartridge until it Locks into placeTroubleshooting and Maintenance Drum Cartridge Replacement External lightDoing so may cause smudges on the copies Press the key or key to display the count of each function Checking the Total CountWipe the cabinet with a soft, clean cloth Cleaning the MachineCabinet Document glass and the back side of the RspfTransfer charger TD cartridge and drum cartridge About SuppliesSupply list Supply Part number Usable lifeOptional Equipment System ConfigurationNetwork Expansion KIT AR-NB2 N Sheet Paper Feed Unit AR-D16Interface cable Using the AR-D16 with the printer functionUSB interface cable Parallel interface cableAppendix SpecificationsResolution Fusing systemPower supply Power consumptionPrint speed Printer FunctionEmulation InterfaceScanner Function Sheet paper feed unit AR-D16 Paper weightPaper size Paper capacitySoftware License 100 Limited Warranty on Media101 Product and Company IdentificationComposition / Information on Ingredients 102 Exposure Controls / Personal Protection 103Physical and Chemical Properties Stability and Reactivity104 105 106 107 108 Date Rivised Mar Date Issued Sep Msds No. F-31231Symbols Index109 110 111 112 Battery Disposal 2004E KS1 TINSE1323QSZZ FO-DC550