Sharp AR_M280, AR-350 2Touch the KEY Operator Programs key, 5Press the Custom Settings key

KEY OPERATOR PROGRAMS

When using the operation panel with touch panel:

1	Press the [CUSTOM SETTINGS] key.	4	Touch the key of the desired category of the key
			operator programs.
				<Example>
			ACCOUNT	ENERGY SAVE
			CONTROL
				For registration of the key
		PRINT SETTINGS		operator code number,
				COPY SETTINGS
				touch "KEY OPERATOR
		KEY OPERATOR CODE		CODE CHANGE".
			CHANGE	PRODUCT KEY

2Touch the KEY OPERATOR PROGRAMS key.

ADDRESS	RECEIVE MODE
CONTROL
KEY OPERATOR PROGRAMS

Use the numeric keys to enter the five-digit

3password.

Each time a number is entered, the dashes (-) in

KEY OPERATOR CODE the display will change to asterisks (*). For the factory

default setting of the key operator code number (password), see page xxxx.

5Press the [CUSTOM SETTINGS] key.

For details of each program, see the description on and after the next page.

6Press the [CUSTOM SETTINGS] key.

KEY OPERATOR CODE

Supplementary explanation of key operation for key operator programs

(when using the operation panel with touch panel)

	KEY OPERATOR PROGRAMS
									20		(1-999)
	NETWORK SETTING						OK
											SEC.
								1/2
			IP ADDRESS SETTING		ENABLE TCP/IP
					ENABLE NetWare
			ENABLE NetWare
			ENABLE NetBEUI
If		XXX	is displayed as an item, the setting screen will be displayed by touching the key.
If		is displayed to the left of an item, a check mark (					) will be displayed by touching			and the program
will be set. If you touch				when a check mark (		) has been already displayed, the check mark will be
cleared and the setting will be canceled.

If the setting items are displayed on multiple screens, the screen can be switched by touching the [] or [] key. If you touch the [EXIT] key, the previous screen will appear again.

The number that has been set is displayed. Numbers can be set by touching the [] or [] key.

6-6