Sharp AR_M280, AR-350 operation manual Misfeed in the paper feed area, Misfeed in paper tray

Page 60

MISFEED REMOVAL

Misfeed in the paper feed area

NOTE

Do not pull out the paper tray first. Paper may be misfed between the paper tray and the paper feed area in the printer. Before pulling out the paper tray, be sure to open the left side cover and check to see if paper is misfed (steps 1 and 2). If you pull out the paper tray without checking, paper may be torn and it may be difficult to remove it.

■Misfeed in paper tray 1

1 Pull out the duplex module.

Hold the knob and gently open the module.

If the machine is not equipped with the duplex module, open the side cover similarly.

2 Remove the misfed paper.

Be careful not to tear the misfed paper during removal.

NOTE

Since paper may be misfed in the inner part, check carefully and remove it.

If misfed paper is not found in step 2, pull

3 out paper tray 1 and remove the misfed paper.

Be careful not to tear the misfed paper during removal.

4 Gently close the paper tray.

Push back the paper tray all the way into the machine.

5 Gently close the duplex module.

If the machine is not equipped with the duplex module, close the side cover similarly.

After closing the duplex module, confirm that the misfeed message is cleared and that the normal display appears.

NOTE

If paper drops beyond the rear side of the paper tray that has been pulled out, remove the paper tray and then remove the paper. (For removal of the paper tray, see the illustration below.)

After pulling out the paper tray until it stops, gently lift and pull the tray to remove it. To reattach the removed paper tray, insert it at an angle and then push it back horizontally in the reverse procedure of removal.

4-4

Image 60

Contents Laser Printer Page Installation Requirements Battery Disposal Safety Precautions Class Laser Product Laser Klasse Facsimile Feature Fax power switchLine connection Contents Chapter Troubleshooting Maintenance Page Before Using the Product ChapterIntroduction Introduction Scanner module/DSPFDuplex module Punch module Main Features Part Names and Functions ExteriorPart Names and Functions InteriorPart names and functions of peripheral units Upper exit tray extension FinisherMail-bin stacker Stand/MPD & 2000 sheet paper drawerOther peripheral units Operation panel Job status screen To cancel the current print job and delete the print data Mode select keys and indicators Print key/READY indicator/DATA indicatorImage Send key/LINE indicator/DATA indicator Copy key Custom Settings keyPrint mode screen Display switching keysTouch panel Job status screen See next Print hold job listMode switching key Job listPaper Empty in the job status display Print JOB keyUsing the touch panel How to use the touch panel Copier feature Facsimile featureExample Tone ExampleLoading Paper Loading paper in paper trayChanging the paper size in paper tray Loading Paper Paper available in paper traysPaper available in the bypass tray/multi purpose drawer Paper that can be usedMethod of setting paper size and type Press the Custom Settings key Press the Tray Settings keySelect the paper tray for which setting is To be made Touch the OK key to complete the settingSpecifications How to change the paper sizeSetting envelopes or postcards Loading paper in the multi purpose drawerLoading paper in the stand/3 x 500 sheet paper drawer Upper paper trayMiddle and lower paper trays Loading paper in the stand/MPD & 2000 sheet paper drawer Upper paper trayPull out the large capacity tray Gently push the large capacity paper tray Into the printerAdding Toner Storage of SuppliesProper storage Page Printing from a Computer Connecting to a Computer Using this machine as a local printerUsing this machine as a network printer Software for WindowsUninstalling Printer Utilities Click the Start buttonBefore installation On the Start menu, select Settings Then PrintersClick the Have Disk button Computer type Operating systemSetting the Printer Driver Right-click the installed printer driver Select PropertiesWindows 95 / 98 / Me Set each itemEnvironment required for accessing Web pages Accessing Web pages and displaying helpClick the Help button under the menu Frame Close the helpRemote Operation Through Network Items and outline of menu frame of Web pagesSet up Password Normal printHold before print Enter the fifth digit of the password Press the OK key Use the same procedure as to enterPrinting method of hold job list Press the Menu keyEnter the password Ensure that the desired number of copies Is setOperation is now complete Printer account control Printer Basic Settings Making Configuration Setting Making Configuration Setting To finish the setting operation, touch Exit keyTouch the key of the desired item to display Main program settings PCL settingsPostScript settings Custom Settings Press the Menu key to display Custom settings menu screenCustom Settings Press the Custom Settings key whenIts setting screen Setting items Page Troubleshooting and Maintenance When using the operation panel on the main unit General misfeed removal procedureMisfeed Removal Press the Information key to close Misfeed removal guidanceWhen using the operation panel with touch panel Misfeed removal guidanceMisfeed in the paper feed area Misfeed in paper trayMisfeed in the multi purpose drawer Misfeed in the stand/MPD & 2000 sheet paper drawerMisfeed in the stand/3 x 500 sheet paper Drawer Misfeed in the transport area, fusing area, and exit area Misfeed in the duplex module Misfeed in the bypass trayTroubleshooting Problem SolutionTroubleshooting Troubleshooting Supplementary explanation for printing User Maintenance Cleaning the scanner modulePeripheral Units Duplex Module Part namesDuplex Module Open the bypass traySet the type of the loaded paper Loading paper in the bypass tray is now CompleteSetting the printer driver in accordance with your purpose Setting copy functions in accordance with your purposeTroubleshooting concerning the duplex module SeeMAIL-BIN Stacker Setting in the printer driver Using the mail-bin stackerMAIL-BIN Stacker Specifying a mail binMisfeed in the mail-bin stacker Open the top coverClose the paper guide Finisher SuppliesSort mode Group mode Offset modeStaple sort mode FinisherUsing the finisher functions Using the stapling function from the printer featureUsing the finisher functions in the copy mode Staple cartridge replacement and staple jam removal Open the front cover Turn the staple unit to face upBox Remove the empty staple cartridgeFinisher Misfeed in the finisher Remove the misfed paper from the stapler CompilerOpen the paper guide and remove Misfed paper Close the finisher Remove the misfed paperTroubleshooting concerning the finisher Not operateStapling position quick reference list Specifications Saddle Stitch FinisherPart names Saddle stitch finisher functions Saddle Stitch FinisherStaple sort mode Using the saddle stitch finisher functions Using the finisher functions in the copy modeStaple cartridge replacement and staple jam removal Staple cartridge replacementInsert a new staple cartridge into the staple 6box 8Insert the staple box 10Close the front cover9Push back the stapler section 1Open the front coverPunch scrap disposal 9Remove the staple box11Return the lever to its original position 12Insert the staple boxMisfeed in the saddle stitch finisher Pull the knob and slide the saddle stitch5Remove the misfed paper Below11Remove the misfed paper Turn roller rotating knob D in the direction 12of the arrowTurn roller rotating knob D in the direction 13of the arrow Troubleshooting concerning the saddle stitch finisher Stapling position quick reference list BindingRelation between print image and saddle stitch KEY Operator Programs KEY Operator Programs Key operator proguram listUsing the key operator programs KEY Operator ProgramsBACK/C Restore Configuration Use the numeric keys to enter the five-digit 3password 5Press the Custom Settings key6Press the Custom Settings key 2Touch the KEY Operator Programs keyDescription of setting programs Energy save Auto power shut-off timer Auto power shut-offPreheat mode Toner save Toner save in printer modeOperation panel settings Auto clear setting Beep settingLanguage setting Disabling of job priority operationDevice settings Disable duplex unitDisable stapler unit Disable paper desk drawersSystem settings default settings Disable notice page printingDisable test page printing Print density levelSystem settings Interface settings Hexadecimal dump modePDL for network port Network port emulation switching TimeoutSystem settings network settings Reset the NICIP address setting EnableTCP/IPSystem settings initialize/store settings Restore factory defaultsStore current configuration Restore configurationAppendix Printer Specifications CPUList of principal printer functions List of Combination of Peripheral Units Disabling notice page and separator sheet printing Print Area Case of portrait orientation in mm