Sharp AR_M280, AR-350 operation manual Duplex Module, Part names

Page 70

DUPLEX MODULE

If a duplex module is installed, printing onto two sides of paper can be performed.

Two types of duplex modules are provided: duplex module/bypass tray and duplex module. Both duplex modules are equipped with an exit port to which an optional exit tray can be mounted. This section describes supposing that an optional exit tray is mounted to a duplex module/bypass tray. For misfeed removal of the duplex module, see page xxx.

Part names

Exit tray

The tray is extendable. To print onto large paper (8-1/2" x 14", 11" x 17", B4 or A3), extend the tray.

Bypass tray

This tray can be used to print onto special papers including transparency film as well as plain paper. (See page xx.)

Duplex module

Automatic two-sided printing can be made. (See page xx.)

NOTES

Do not put pressure on the bypass tray or the exit tray.

Some other peripheral units may be needed for installation of the duplex module and some peripheral units cannot be installed together with the duplex module. For combination of the peripheral units, see the list of combination of peripheral units on page xxxx.

Specifications

Name

Duplex module and Duplex module/bypass tray

 

 

Paper capacity

1 (trayless system)

 

 

Paper size

Max. 11" x 17" or A3, Min. 5-1/2" x 8-1/2"R or A5R

 

 

Paper weight

15 to 28 lbs. or 56 to 105 g/m2

Reference paper position

Center

 

 

Bypass tray paper capacity*1

100 sheets (8-1/2" x 11" or A4 size, 20 lbs. or 80 g/m2)

Dimensions

Duplex module: xx-x/x” (W) x xx-x/x” (D) x xx-x/x” (H) (xxx mm (W) x

 

xxx mm (D) x xxx mm (H))

 

Duplex module/bypass tray: xx-x/x” (W) x xx-x/x” (D) x xx-x/x” (H) (xxx

 

mm (W) x xxx mm (D) x xxx mm (H))

 

 

Weight

Duplex module: Approx. xxx lbs. (xx kg)

 

Duplex module/bypass tray: Approx. xxx lbs. (xx kg)

 

 

1 Duplex module/bypass tray only. For use of the bypass tray, see “Paper available in the bypass tray/ multi purpose drawer” on page xxxx.

Name

Exit tray

 

 

Exit system

Print face down

 

 

Paper capacity

100 sheets (8-1/2" x 11" or A4 size, 20 lbs. or 80 g/m2)

Paper size

Max. 11" x 17" or A3, Min. 5-1/2" x 8-1/2"R or A5R

 

 

Specifications are subject to change for improvement without notice.

5-2

Image 70
Contents Laser Printer Page Installation Requirements Battery Disposal Safety Precautions Class Laser Product Laser Klasse Fax power switch Facsimile FeatureLine connection Contents Chapter Troubleshooting Maintenance Page Before Using the Product ChapterIntroduction Scanner module/DSPF IntroductionDuplex module Punch module Main Features Part Names and Functions ExteriorPart Names and Functions InteriorPart names and functions of peripheral units Mail-bin stacker Upper exit tray extensionFinisher Stand/MPD & 2000 sheet paper drawerOther peripheral units Operation panel Job status screen To cancel the current print job and delete the print data Image Send key/LINE indicator/DATA indicator Copy key Mode select keys and indicatorsPrint key/READY indicator/DATA indicator Custom Settings keyTouch panel Print mode screenDisplay switching keys Job status screen See next Print hold job listPaper Empty in the job status display Mode switching keyJob list Print JOB keyExample Using the touch panel How to use the touch panelCopier feature Facsimile feature Tone ExampleLoading paper in paper tray Loading PaperChanging the paper size in paper tray Paper available in the bypass tray/multi purpose drawer Loading PaperPaper available in paper trays Paper that can be usedMethod of setting paper size and type Select the paper tray for which setting is To be made Press the Custom Settings keyPress the Tray Settings key Touch the OK key to complete the settingSetting envelopes or postcards SpecificationsHow to change the paper size Loading paper in the multi purpose drawerUpper paper tray Loading paper in the stand/3 x 500 sheet paper drawerMiddle and lower paper trays Pull out the large capacity tray Loading paper in the stand/MPD & 2000 sheet paper drawerUpper paper tray Gently push the large capacity paper tray Into the printerStorage of Supplies Adding TonerProper storage Page Printing from a Computer Using this machine as a network printer Connecting to a ComputerUsing this machine as a local printer Software for WindowsUninstalling Printer Utilities Click the Start buttonClick the Have Disk button Before installationOn the Start menu, select Settings Then Printers Computer type Operating systemWindows 95 / 98 / Me Setting the Printer DriverRight-click the installed printer driver Select Properties Set each itemClick the Help button under the menu Frame Environment required for accessing Web pagesAccessing Web pages and displaying help Close the helpRemote Operation Through Network Items and outline of menu frame of Web pagesSet up Normal print PasswordHold before print Printing method of hold job list Enter the fifth digit of the password Press the OK keyUse the same procedure as to enter Press the Menu keyEnsure that the desired number of copies Is set Enter the passwordOperation is now complete Printer account control Printer Basic Settings Making Configuration Setting To finish the setting operation, touch Exit key Making Configuration SettingTouch the key of the desired item to display PCL settings Main program settingsPostScript settings Custom Settings Press the Menu key to display Custom settings menu screenPress the Custom Settings key when Custom SettingsIts setting screen Setting items Page Troubleshooting and Maintenance Misfeed Removal When using the operation panel on the main unitGeneral misfeed removal procedure Press the Information key to close Misfeed removal guidanceWhen using the operation panel with touch panel Misfeed removal guidanceMisfeed in the paper feed area Misfeed in paper trayMisfeed in the stand/MPD & 2000 sheet paper drawer Misfeed in the multi purpose drawerMisfeed in the stand/3 x 500 sheet paper Drawer Misfeed in the transport area, fusing area, and exit area Misfeed in the duplex module Misfeed in the bypass trayTroubleshooting Problem SolutionTroubleshooting Troubleshooting Supplementary explanation for printing User Maintenance Cleaning the scanner modulePeripheral Units Duplex Module Part namesSet the type of the loaded paper Duplex ModuleOpen the bypass tray Loading paper in the bypass tray is now CompleteSetting the printer driver in accordance with your purpose Setting copy functions in accordance with your purposeTroubleshooting concerning the duplex module SeeMAIL-BIN Stacker MAIL-BIN Stacker Setting in the printer driverUsing the mail-bin stacker Specifying a mail binOpen the top cover Misfeed in the mail-bin stackerClose the paper guide Finisher SuppliesStaple sort mode Sort mode Group modeOffset mode FinisherUsing the stapling function from the printer feature Using the finisher functionsUsing the finisher functions in the copy mode Box Staple cartridge replacement and staple jam removalOpen the front cover Turn the staple unit to face up Remove the empty staple cartridgeFinisher Open the paper guide and remove Misfed paper Misfeed in the finisherRemove the misfed paper from the stapler Compiler Close the finisher Remove the misfed paperTroubleshooting concerning the finisher Not operateStapling position quick reference list Saddle Stitch Finisher SpecificationsPart names Saddle stitch finisher functions Saddle Stitch FinisherStaple sort mode Using the saddle stitch finisher functions Using the finisher functions in the copy modeStaple cartridge replacement Staple cartridge replacement and staple jam removalInsert a new staple cartridge into the staple 6box 9Push back the stapler section 8Insert the staple box10Close the front cover 1Open the front cover11Return the lever to its original position Punch scrap disposal9Remove the staple box 12Insert the staple box5Remove the misfed paper Misfeed in the saddle stitch finisherPull the knob and slide the saddle stitch BelowTurn roller rotating knob D in the direction 12of the arrow 11Remove the misfed paperTurn roller rotating knob D in the direction 13of the arrow Troubleshooting concerning the saddle stitch finisher Stapling position quick reference list BindingRelation between print image and saddle stitch KEY Operator Programs KEY Operator Programs Key operator proguram listUsing the key operator programs KEY Operator ProgramsBACK/C Restore Configuration 6Press the Custom Settings key Use the numeric keys to enter the five-digit 3password5Press the Custom Settings key 2Touch the KEY Operator Programs keyDescription of setting programs Preheat mode Energy save Auto power shut-off timerAuto power shut-off Toner save Toner save in printer modeLanguage setting Operation panel settings Auto clear settingBeep setting Disabling of job priority operationDisable stapler unit Device settingsDisable duplex unit Disable paper desk drawersDisable test page printing System settings default settingsDisable notice page printing Print density levelPDL for network port Network port emulation switching System settings Interface settingsHexadecimal dump mode TimeoutIP address setting System settings network settingsReset the NIC EnableTCP/IPStore current configuration System settings initialize/store settingsRestore factory defaults Restore configurationAppendix Printer Specifications CPUList of principal printer functions List of Combination of Peripheral Units Disabling notice page and separator sheet printing Print Area Case of portrait orientation in mm