Sharp AR-M236, AR-M276 operation manual Interior

Page 11

BEFORE USING THE MACHINE

Interior

17

18

21

1

 

 

 

19

20

22

15Bypass tray

Regular paper and special paper (such as transparency film) can be fed from the bypass tray. (p.18)

16Bypass tray extension

Pull out the bypass tray extension before placing paper in the bypass tray. (p.18)

17Toner cartridge lock release lever Use to unlock the toner cartridge. (p.71)

18Toner cartridge Contains toner. (p.71)

19Roller rotating knob

Turn to remove misfed paper. (p.65)

20Photoconductive drum

Copy images are formed on the photoconductive drum.

Caution

Do not touch the photoconductive drum

(green portion). Doing so may damage the

 

drum and cause smudges on copies.

21Fusing unit release levers

To remove a paper misfeed in the fusing unit, push up on these levers and remove the paper. (p.66)

Warning

The fusing unit is hot. Do not touch

the fusing unit when removing

 

misfed paper. Doing so may cause a

 

burn or injury.

22Fusing unit paper guide

Open to remove misfed paper. (p.66)

Note The model name is on the front cover of the machine.

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents
AR-M236 AR-M276 Page Contents 500-SHEET Paper Feed Unit When a finisher AR-FN5N is installedAir conditioner or Important Points When Selecting AN Installation SiteDo not install your machine in areas that are Changes, e.g., near anDo not touch the photoconductive drum green portion Trademark acknowledgementsOnline manual for printer Using the ManualSoftware setup guide for printer Environmental Information AB series metric and inch series references Meaning of R in Original and Paper Size Indications Conventions Used in this Manual Explanation of words and illustrationMain Features Part Names and Functions Interior Operation Panel Beep tone Using the touch panel Selecting a functionTouch Panel ExamplePrint JOB key Mode switching keysDisplay switching keys Job listTurn the power switch to the on position Power on and OFFPower on Power OFFAuto power shut-off mode Initial SettingsPower Save Modes Preheat modeUpper paper tray*1 Plain paper A5 to A3 56 g/m2 to 105 g/m2 Tray Paper tray type Paper type Size Weight CapacityLoading Paper PaperLetterhead paper Follow these guidelines when using special papersSpecial papers EnvelopesLoading the paper in the paper tray Loading PaperSet the paper guides to the copy paper width Important points when inserting paper in the bypass trayLoading paper in the bypass tray Select the tray in which you loaded paper Changing a TRAY’S Paper Type and Paper Size SettingsTouch the Tray Settings key Setting the paper type in the bypass tray Main Screen of Copy Mode Close the document cover/RSPF How to place the originalNormal Copying Copying from the Document GlassCopying a large number of originals Adjust the original guides to the size of the originalStream feeding mode Copying from the RspfRemoving the document cover Points to Note When Making CopiesDocument glass and Rspf Originals that can be used in the RspfTouch the Special Modes key Select the MIX Size Original Feeding Mode checkboxCopying originals of mixed length Mixed feeding Automatic copy image rotation rotation copyingTray. p.20 Shifting the starting position of copyingSet the type of paper that You loaded in the bypassOriginal → Paper Using the Document GlassAutomatic TWO-SIDED Copying Touch the One-sided to two-sided copy keyOriginal for the front side is scanned Using the RspfTouch the desired copy mode To cancel automatic two-sided copying, press the Clear keyExposure value guidelines Exposure AdjustmentTouch the Exposure key Manually adjust the copy exposure Selecting the original image typePlace the originals. p.22, p.23 Original type setting Original position Selectable ratiosREDUCTION/ENLARGEMENT/ZOOM Automatic Ratio SelectionPlace the originals. p.22, p.23 Touch the Copy Ratio key Manual Ratio SelectionTouch the XY Zoom key Direction Copy ratio in the vertical Y directionZoom keys To change Copy ratio in the horizontalReplace only the originals that have not yet been scanned Interrupting a Copy RUNPress the Interrupt key to interrupt the copy run Offset Function Copy Finishing FunctionsSort Copy Group CopyTouch the Sort or Group key When using the RspfWhen using the document glass Touch the Output keyInsert the originals face up Place each original face down Using the Rspf Using the document glassStaple Sort Orientation of the Original and Stapling PositionsTouch the Staple Sort key Place the originals. p.22, p.23 Touch the Output keySpecial Modes Example Selecting the margin shift function General Procedure for Using the Special FunctionsTouch the key of the desired special mode Select the shift direction Adjust the shift width as needed and touch the OK keyMargin Shift Copy Touch the Margin Shift key in the special modes screenTouch the Erase key in the special modes screen Select the desired erase modeAdjust the erase width as needed and touch the OK key Erase CopyPlace the originals on the document glass. p.22 When copying book originalsDual page Copy Touch the Dual page Copy key in the special modes screenSpecify whether 1-sided or 2-sided originals will be copied Pamphlet CopyTouch the READ-END key JOB Build ModeTouch the JOB Build key in the special modes menu screen Multi Shot Copy Touch the inside OK key Original SizeTouch the Manual key Select the original sizeNot copying onto a cover Cover CopyCopying onto a cover Specify whether or not the front cover is to be copied on Touch the OK key in the cover setting screenSelect the covers that you wish to add Load the cover paper to be used into the bypass trayProgrammed Custom SettingsThis is used to print a setting list or a font list. p.52 Continuous printing. p.52Custom Settings General Procedure for Custom SettingsSettings Touch the STORE/DELETE key JOB Program MemoryStoring a JOB Program Touch the program number key of the desired program Executing a JOB ProgramDeleting a Stored JOB Program Press the keyEnter your account number 5 digits with the numeric keys Auditing ModeCopying When Auditing Mode is Enabled When the copy job is finished, press the ACC.#-C keyImage quality problems Trouble Problems related to machine operationPaper feeding problems Display Messages Message Cause and solutionStaples are jammed in the finisher or the staple case is not Contact your authorised service representativeProblems related to machine operation TroubleshootingOriginals were being scanned Automatically, or copying does notOriginal is not a standard size Copy, print job, or received fax is being printedPaper feeding problems Image quality problems First, locate the misfeed Misfeed RemovalMisfeed Removal Guidance Section a Misfeed in the RspfRemove the misfed original Section CMisfeed in the paper feed area Misfeed in the Bypass TrayMisfeed in the Machine Make sure that the misfeed message is cleared Misfeed in the fusing areaClose the front cover and side cover Turn the roller rotating knob in the direction of the arrowReplace the upper paper tray Misfeed in the Centre TrayMisfeed in the Upper Paper Tray Close the lower side cover Misfeed in the Lower Paper TrayOpen the lower side cover Remove the misfed paper Replace the lower paper trayGently pull the misfed paper out Misfeed in the Upper Exit AreaMisfeed in AN Output Tray Troubleshooting and Maintenance Close the front cover Replacing the Toner CartridgeStaple Cartridge Replacement Checking the total output count and toner quantity Checking the Toner Quantity and Total Output CountStaple JAM Removal Surface of document glass Underside of document cover/RSPF Cleaning the MachineDocument Glass and Document COVER/RSPF Bypass Tray Paper Feed RollerReversing Single Pass Feeder AR-RP7 See Peripheral DevicesPart names SpecificationsFinisher AR-FN5N Capacity Lower tray Sheet Paper Feed UnitPaper Upper tray Store the supplies in a location that is Storage of SuppliesReversing Single Pass Feeder Proper StorageSpecifications Developer system ResolutionPower consumption Overall dimensionsSupplier Identification Sharp Corporation Product NameMost Important Hazards and Effects of the Products Personal PrecautionsEnvironmental Precautions Methods for Cleaning UpBoiling/Melting Point Exposure limit valuesPersonal Protective Equipment AppearanceHuman exposures 4/4Chronic Effect Ingredient CAS No Proportion Data Issued AugMsds No. F-31201 AR-271ND / AR-271DV / AR-271SD / AR-271SD-C Black DeveloperData Issued Aug Msds No. F-31201 Acute Toxicity Toxicological InformationDisposal Considerations Index SymbolsJob program How to place the originalImportant points when inserting paper Important points when selecting an installation site15, 19 Points to note when making copiesPower save modes Setting the paper type in the bypass trayMaking copies Using convenient copy functionsTroubleshooting and maintenance PreparationsMemo Memo Memo Class Laser Product Laser Klasse Mains Plug Wiring Instructions 2003H KS ➀
Related manuals
Manual 20 pages 61.32 Kb Manual 8 pages 54.74 Kb
Top Page Image Contents