Sharp AR-M276 Place the originals. p.22, p.23 Touch the Output key, Touch the Staple Sort key

CONVENIENT COPY FUNCTIONS

1 Place the original(s). (p.22, p.23)

2 Touch the [OUTPUT] key.

2-SIDED COPY

OUTPUT

3 Touch the [STAPLE SORT] key.

			When the [STAPLE
OUTPUT
		TOP TRAY	SORT] key is selected,
SORT			the offset tray is
			automatically selected as
STAPLE
SORT			the output tray. The top
			tray and centre tray
	OFFSET
GROUP
	TRAY		cannot be used.

4 Touch the [OK] key.

OK

CENTRE TRAY

OFFSET

5 Select the number of copies and other copy settings, and then press the [START] key ( ).

6 [When using the RSPF:]

Copying will start after all originals have been scanned.

[When using the document glass:]

Replace the original with the next original and press the [START] key ( ). Repeat this step until all originals have been scanned, and then touch the [READ-END] key.

PLACE NEXT ORIGINAL. PRESS [START].

WHEN FINISHED, PRESS [READ-END].

READ-END

If the memory becomes full while scanning the originals, "MEMORY IS FULL. PRESS [START] TO BEGIN COPYING OR [CA] TO CANCEL." will appear. To copy only the originals that have been scanned, press the [START] key ( ). To cancel the job, press the [CLEAR ALL] key ( ).

The number of originals that can be scanned Note into memory can be increased by increasing

the memory allocation in the key operator programs, or by installing more memory. (See the "Key operator’s guide".)

38