Sharp AR-M276, AR-M236 operation manual Operation Panel

Page 12

BEFORE USING THE MACHINE

OPERATION PANEL

COPY

 

PRINT

ON LINE

DATA

 

SCAN

DATA

FAX

LINE

DATA

 

JOB STATUS

CUSTOM SETTINGS

 

ACC.#-C

The indicators of the operation panel may

differ depending on the

1

2 3

4

5 6 7

8

9 10 11

country and region.

 

 

 

 

 

 

 

 

 

 

 

 

1 Touch panel

 

3

[JOB STATUS] key

 

 

The machine status, messages and touch keys are

 

Press to display the current job status. (p.12)

displayed on the panel. The display will show the

4

[CUSTOM SETTINGS] key

 

status of printing, copying or network scanning

 

 

 

 

 

 

according to the mode that is selected. For details

Use to adjust various settings of the machine

including the contrast of the touch panel and key

see the next page.

operator programs. (p.51)

 

2Mode select keys and indicators

Use to change modes and the corresponding

5

Numeric keys

 

 

 

Use to enter numeric values for various settings.

display on the touch panel.

 

 

 

 

 

[COPY] key

6

[ACC.#-C] key (

)

 

Press to select copy mode.

 

When auditing mode is enabled, press this key

[PRINT] key/ONLINE indicator/

 

after finishing a job to return the machine to

DATA indicator

 

account number entry standby.

Press to select print mode.

7

[#/P] key ( )

 

 

•

ONLINE indicator

 

 

 

Use this key to execute a job program in copy

 

Print jobs can be received when this indicator is lit.

 

 

 

mode.

 

 

•

DATA indicator

 

 

 

 

The key is also used to dial in fax mode.

 

A print job is in memory. The indicator lights

8

[CLEAR] key (

)

 

 

steadily while the job is held in memory, and

 

 

 

Press to clear a copy number setting or cancel a

 

blinks while the job is printed.

 

[SCAN] key/DATA indicator (When the

 

job.

 

 

 

 

 

 

network scanner option is installed.)

9

[START] key (

)

 

Press to select network scan mode when the

 

Press in copy mode, scanner mode, or fax mode to

network scanner option is installed.

 

 

begin copying, network scanning, or faxing.

•

DATA indicator

 

 

This key blinks when auto power shut mode has

 

Lights steadily or blinks while a scanned image

 

 

 

activated. Press the key to return to normal

 

is being sent.

 

operation.

 

 

 

(See "Operation manual (for network

10

[INTERRUPT] key (

)

 

scanner)".)

 

 

Use to perform an interrupt copy job. (p.34)

[FAX] key/LINE indicator/DATA indicator

 

 

 

 

 

(When the fax option is installed.)

11

[CLEAR ALL] key (

)

Press to select fax mode when the fax option is

 

Resets the settings to the initial settings.

installed.

 

 

 

 

 

•LINE indicator

this lights up while faxes are being sent or received.

•DATA indicator

Blinks when a fax has been received to memory and lights steadily when a fax is waiting in memory for transmission. (See operation manual for facsimile.)

10

Page 11 Page 13
Image 12
Page 11 Page 13
Contents
AR-M236 AR-M276 Page Contents When a finisher AR-FN5N is installed 500-SHEET Paper Feed UnitImportant Points When Selecting AN Installation Site Do not install your machine in areas that areChanges, e.g., near an Air conditioner orTrademark acknowledgements Do not touch the photoconductive drum green portionUsing the Manual Software setup guide for printerEnvironmental Information Online manual for printerMeaning of R in Original and Paper Size Indications Conventions Used in this ManualExplanation of words and illustration AB series metric and inch series references Main Features Part Names and Functions Interior Operation Panel Using the touch panel Selecting a function Touch PanelExample Beep toneMode switching keys Display switching keysJob list Print JOB keyPower on and OFF Power onPower OFF Turn the power switch to the on positionInitial Settings Power Save ModesPreheat mode Auto power shut-off modeTray Paper tray type Paper type Size Weight Capacity Loading PaperPaper Upper paper tray*1 Plain paper A5 to A3 56 g/m2 to 105 g/m2Follow these guidelines when using special papers Special papersEnvelopes Letterhead paperLoading Paper Loading the paper in the paper trayImportant points when inserting paper in the bypass tray Loading paper in the bypass traySet the paper guides to the copy paper width Changing a TRAY’S Paper Type and Paper Size Settings Touch the Tray Settings keySelect the tray in which you loaded paper Setting the paper type in the bypass tray Main Screen of Copy Mode How to place the original Normal CopyingCopying from the Document Glass Close the document cover/RSPFAdjust the original guides to the size of the original Stream feeding modeCopying from the Rspf Copying a large number of originalsPoints to Note When Making Copies Document glass and RspfOriginals that can be used in the Rspf Removing the document coverSelect the MIX Size Original Feeding Mode checkbox Copying originals of mixed length Mixed feedingAutomatic copy image rotation rotation copying Touch the Special Modes keyShifting the starting position of copying Set the type of paper thatYou loaded in the bypass Tray. p.20Using the Document Glass Automatic TWO-SIDED CopyingTouch the One-sided to two-sided copy key Original → PaperUsing the Rspf Touch the desired copy modeTo cancel automatic two-sided copying, press the Clear key Original for the front side is scannedExposure Adjustment Touch the Exposure key Manually adjust the copy exposureSelecting the original image type Exposure value guidelinesOriginal type setting Original position Selectable ratios REDUCTION/ENLARGEMENT/ZOOMAutomatic Ratio Selection Place the originals. p.22, p.23Manual Ratio Selection Place the originals. p.22, p.23 Touch the Copy Ratio keyTouch the XY Zoom key Copy ratio in the vertical Y direction Zoom keys To changeCopy ratio in the horizontal DirectionInterrupting a Copy RUN Press the Interrupt key to interrupt the copy runReplace only the originals that have not yet been scanned Copy Finishing Functions Sort CopyGroup Copy Offset FunctionWhen using the Rspf When using the document glassTouch the Output key Touch the Sort or Group keyUsing the Rspf Using the document glass Staple SortOrientation of the Original and Stapling Positions Insert the originals face up Place each original face downPlace the originals. p.22, p.23 Touch the Output key Touch the Staple Sort keySpecial Modes General Procedure for Using the Special Functions Touch the key of the desired special modeExample Selecting the margin shift function Adjust the shift width as needed and touch the OK key Margin Shift CopyTouch the Margin Shift key in the special modes screen Select the shift directionSelect the desired erase mode Adjust the erase width as needed and touch the OK keyErase Copy Touch the Erase key in the special modes screenWhen copying book originals Dual page CopyTouch the Dual page Copy key in the special modes screen Place the originals on the document glass. p.22Pamphlet Copy Specify whether 1-sided or 2-sided originals will be copiedJOB Build Mode Touch the JOB Build key in the special modes menu screenTouch the READ-END key Multi Shot Copy Original Size Touch the Manual keySelect the original size Touch the inside OK keyCover Copy Copying onto a coverNot copying onto a cover Touch the OK key in the cover setting screen Select the covers that you wish to addLoad the cover paper to be used into the bypass tray Specify whether or not the front cover is to be copied onCustom Settings This is used to print a setting list or a font list. p.52Continuous printing. p.52 ProgrammedGeneral Procedure for Custom Settings Custom SettingsSettings JOB Program Memory Storing a JOB ProgramTouch the STORE/DELETE key Executing a JOB Program Deleting a Stored JOB ProgramPress the key Touch the program number key of the desired programAuditing Mode Copying When Auditing Mode is EnabledWhen the copy job is finished, press the ACC.#-C key Enter your account number 5 digits with the numeric keysTrouble Problems related to machine operation Paper feeding problemsImage quality problems Message Cause and solution Display MessagesContact your authorised service representative Staples are jammed in the finisher or the staple case is notTroubleshooting Problems related to machine operationAutomatically, or copying does not Original is not a standard sizeCopy, print job, or received fax is being printed Originals were being scannedPaper feeding problems Image quality problems Misfeed Removal Misfeed Removal GuidanceFirst, locate the misfeed Misfeed in the Rspf Remove the misfed originalSection C Section aMisfeed in the Bypass Tray Misfeed in the MachineMisfeed in the paper feed area Misfeed in the fusing area Close the front cover and side coverTurn the roller rotating knob in the direction of the arrow Make sure that the misfeed message is clearedMisfeed in the Centre Tray Misfeed in the Upper Paper TrayReplace the upper paper tray Misfeed in the Lower Paper Tray Open the lower side cover Remove the misfed paperReplace the lower paper tray Close the lower side coverMisfeed in the Upper Exit Area Misfeed in AN Output TrayGently pull the misfed paper out Troubleshooting and Maintenance Replacing the Toner Cartridge Close the front coverStaple Cartridge Replacement Checking the Toner Quantity and Total Output Count Staple JAM RemovalChecking the total output count and toner quantity Cleaning the Machine Document Glass and Document COVER/RSPFBypass Tray Paper Feed Roller Surface of document glass Underside of document cover/RSPFPeripheral Devices Reversing Single Pass Feeder AR-RP7 SeeSpecifications Finisher AR-FN5NPart names Sheet Paper Feed Unit Paper Upper trayCapacity Lower tray Storage of Supplies Reversing Single Pass FeederProper Storage Store the supplies in a location that isSpecifications Resolution Power consumptionOverall dimensions Developer systemProduct Name Supplier Identification Sharp CorporationPersonal Precautions Environmental PrecautionsMethods for Cleaning Up Most Important Hazards and Effects of the ProductsExposure limit values Personal Protective EquipmentAppearance Boiling/Melting Point4/4 Chronic EffectHuman exposures Data Issued Aug Msds No. F-31201AR-271ND / AR-271DV / AR-271SD / AR-271SD-C Black Developer Ingredient CAS No ProportionData Issued Aug Msds No. F-31201 Toxicological Information Acute ToxicityDisposal Considerations Symbols IndexHow to place the original Important points when inserting paperImportant points when selecting an installation site Job programPoints to note when making copies Power save modesSetting the paper type in the bypass tray 15, 19Using convenient copy functions Troubleshooting and maintenancePreparations Making copiesMemo Memo Memo Class Laser Product Laser Klasse Mains Plug Wiring Instructions 2003H KS ➀
Related manuals
Manual 20 pages 61.32 Kb Manual 8 pages 54.74 Kb
Top Page Image Contents