Sharp AR-203E Reduction/Enlargement/Zoom, Selecting the tray, Set the reduction/enlargement ratio

REDUCTION/ENLARGEMENT/ZOOM

Three preset reduction ratios and two enlargement ratios can be selected. The zoom function enables copy ratio selection from 25% to 400% in 1% increments.

1

2

3

Set the original and check the paper size.

Use the copy ratio selector key and/or ZOOM ( , ) keys to select the desired copy ratio.

•	To verify a zoom setting without changing the zoom ratio,
	press and hold down the copy ratio display (%) key. When the
	key is released, the display will return to the copy quantity
	display.	3
•	To reset the ratio to 100%, press the copy ratio selector key
	repeatedly until the 100% indicator lights up.

Set the reduction/enlargement ratio.

To decrease or increase the zoom ratio rapidly, press and hold down the ZOOM ( ) or ( ) key. However the value will stop at the preset reduction or enlargement ratios. To move beyond these ratios, release the key and then press and hold it down again.

To select a preset copy ratio:

Preset reduction and enlargement ratios are: 50%, 70%, 86%, 141%, and 200%.

To select a zoom ratio:

When a ZOOM ( or ) key is pressed, the ZOOM indicator will light up and the zoom ratio will be displayed in the display.

A4

B5

A5

141 A5 A4

86 A4 B5

70 A4 A5

Selecting the tray

Press the tray select ( ) key.

Each time you press the tray select ( ) key, the location indicated by the paper feed location indicator changes in the following order: paper tray 1, paper tray 2 if installed, multi-bypass tray.

141 A5 A4

86 A4 B5

70 A4 A5

19