6 Close the front cover and then the side cover by pressing the round projections near the side cover open button. The indicator ( 
) will go out and the start (
) indicator will light up.
When closing the covers, be sure to close the front cover securely and then close the side cover. If the covers are closed in the wrong order, the covers may be damaged.
Even after a new toner cartridge is installed, the start (
) indicator may not light up, indicating copying cannot be restarted (toner is not sufficiently fed). In this case, open and close the side cover. The copier will feed toner again approximately 2 minutes and then copying can be restarted.
TONER CARTRIDGE LIFE
To find out the approximate quantity of toner remaining, follow the procedure described below.
1 |
| Press and hold down the light ( ) key for more than 5 |
| ||
|
| seconds until all the alarm indicators ( , , , | ) blink |
| |
|
|
| |||
|
| and " | " appears in the display. |
|
|
|
|
|
| ||
2 |
| Press and hold down the copy ratio display (%) key for more thn |
| ||
|
| 5 seconds. |
| 6 | |
|
|
| |||
|
| The approximate quantity of toner remaining will be indicated in the display | |||
|
| as a percentage ("100", "75", "50", "25" or "10" is displayed). When the | |||
|
| percentage is less than 10%, ( ) will be displayed. |
|
| |
3 |
|
|
|
| |
| Press the light ( ) key. |
|
| ||
All alarm indicators wil go out.
47