Sharp AR-203E manual Using the Scan key to begin scanning, Press the Scan key

Using the SCAN key to begin scanning

•Scanning is not possible during a copy job.

• If the SCAN ( ) key is pressed during a print job, the scan job will be stored.

•When scanning an original that has been placed in the SPF, only one original can be placed unless you are using Sharpdesk.

1

2

3

Press the SCAN () key.

The unit enters scan mode.

Place the original you wish to scan on the document glass/SPF.

For the procedure for placing the original, see "ORIGINAL PLACEMENT"		4
(p.15).
Press the right copy quantity
key to display the number of
the application that you wish to
use for scanning.
The application numbers are initially
as follows.
Application	Application launched
number
SC1	Sharpdesk
SC2	E-mail
SC3	Fax
SC4	OCR
SC5	Microsoft Word
SC6	Filing

To check the settings, see "Scan Button Destination Setting Dialog Box" (p.34) and then open the settings window of the Button Manager.

37